Product guide

QSSC-S4R Server System Product Guide Using the BIOS and utilities
Version 1.0
143
Server Management Screen
The Server Management screen allows you to configure several server management features. This screen also
provides an access point to the screens for configuring console redirection and displaying system information.
To access this screen from the Main screen, select Server Management.
Main Advanced Security Se
r
ver Management Boot Options Boot Manage
r
Assert NMI on SERR
Enabled / Disabled
Assert NMI on PERR
Enabled / Disabled
Resume on AC Power Loss
Stay Of
f
/ Last state / Reset
Clear System Event Log
Enabled / Disabled
FRB-2 Enable
Enabled / Disabled
O/S Boot Watchdog Timer
Enabled / Disabled
O/S Boot Watchdog Timer Policy
Power of
f
/ Reset
O/S Boot Watchdog Timer Timeout
5 minutes / 10 minutes / 15 minutes / 20 minutes
Plug & Play BMC Detection
Enabled / Disabled
► Console Redirection
► System Information
► BMC LAN Configuration
Figure 142. Setup Utility — Server Management Screen
Table 36. Setup Utility — Server Management Configuration Screen Fields
Setup Item Options Help Text Comments
A
ssert NMI on SERR Enabled
Disabled
On SERR, generate an NMI and log an error.
Note: [Enabled] must be selected for the Assert NMI on PERR
setup option to be visible.
A
ssert NMI on PERR Enabled
Disabled
On PERR, generate an NMI and log an error.
Note: This option is only active if the Assert NMI on SERR
option is [Enabled] selected.
Resume on AC Power
Loss
Stay Off
Last state Reset
System action to take on AC power loss recovery.
[Stay Off] – System stays off.
[Last State] – System returns to the same state before the AC
power loss.
[Reset] – System powers on.
Clear System Event Log Enabled
Disabled
If enabled, clears the System Event Log. All current entries will
be lost.
Note: This option is reset to [Disabled] after a reboot.
FRB-2 Enable Enabled
Disabled
Fault Resilient Boot (FRB).
If enabled, the BIOS programs the BMC watchdog timer for
approximately 6 minutes. If the BIOS does not complete POST
before the timer expires, the BMC resets the system.
O/S Boot Watchdog Timer Enabled
Disabled
If enabled, the BIOS programs the watchdog timer with the
timeout value selected. If the OS does not complete booting
before the timer expires, the BMC resets the system and an
error is logged.
Requires OS support or Intel Management Software.
O/S Boot Watchdog Timer
Policy
Power Off
Reset
If the OS boot watchdog timer is enabled, this is the system
action taken if the watchdog timer expires.
Grayed out when O/S Boot
Watchdog Timer is disabled.