Product guide
Using the BIOS and utilities QSSC-S4R Server System Product Guide
Version 1.0
142
Setup Item Options (Default in
Boldface)
Help Text Comments
Only alphanumeric characters can be used.
Maximum length is 7 characters (case
sensitive).
Note: Administrator password must be set in
order to use the user account.
all the setup items. Clearing the
A
dministrato
r
password also
clears the user password.
Set User Password [123aBcD] User password is used to control entry access
to BIOS Setup Utility.
Only alphanumeric characters can be used.
Maximum length is 7 characters. It is case
sensitive.
Note: Removing the administrator password
also automatically removes the user password.
This option is available only if the
administrator password is
installed. This option only protects
the setup.
User password only has limited
access to the setup items.
Front Panel Lockout Enabled
Disabled
If enabled, locks the power button and reset
button on the system's front panel.
If [Enabled] is selected, power and reset must
be controlled via a system management
interface.
TPM State Enabled and
A
ctivated
Enabled and
Deactivated
Disabled and
A
ctivated
Disabled and
Deactivated
Information only.
Shows the current TPM device
state.
A
disabled TPM device does not
execute commands that use the
TPM functions and TPM security
operations are not available.
A
n enabled and deactivated TPM
is in the same state as a disabled
TPM except setting of the TPM
ownership is allowed if not
present already.
A
n enabled and activated TPM
executes all commands that use
the TPM functions and TPM
security operations are also
available.
TPM Administrative
Control
No Operation
Turn On
Turn Off
Clear Ownership
[No Operation] - No changes to current state.
[Turn On] - Enables and activates TPM.
[Turn Off] - Disables and deactivates
TPM.
[Clear Ownership] - Removes the TPM
ownership authentication and returns the TPM
to a factory default state.
Note: The BIOS setting returns to [No
Operation] on every boot cycle by default.