Product guide

QSSC-S4R Server System Product Guide Using the BIOS and utilities
Version 1.0
141
System Acoustic and Performance Configuration
The System Acoustic and Performance Configuration screen allows you to configure the thermal characteristics
of the system.
To access this screen from the Main screen, select Advanced > System Acoustic and Performance
Configuration.
Advanced
System Acoustic and Performance
Configuration
Altitude
300m or less / 301m-900m / 901m – 1500m / Higher than
1500m
Figure 140. Setup Utility — System Acoustic and Performance Configuration
Table 34. Setup Utility — System Acoustic and Performance Configuration Screen Fields
Setup Item Options (Default in
Boldface)
Help Text Comments
A
ltitude 300m or less
301m-900m
901m-1500m
Higher than 1500m
[300m or less] (980ft or less)
Optimal performance setting near sea level.
[301m - 900m] (980ft - 2950ft)
Optimal performance setting at moderate elevation.
[901m – 1500m] (2950ft – 4920ft)
Optimal performance setting at high elevation.
[Higher than 1500m] (4920ft or greater)
Optimal performance setting at the highest elevations.
Security Screen
The Security screen allows you to enable and set the user and administrative password. This is done to lock out
the front panel buttons so they cannot be used. This screen also allows the user to enable and activate the
Trusted Platform Module (TPM) security settings.
To access this screen from the Main screen, select Security.
Main Advanced Security Server Management Boot Options Boot Manager
Administrator Password Status
<Installed/Not Installed>
User Password Status
<Installed/Not Installed>
Set Administrator Password [1234aBcD]
Set User Password [1234aBcD]
Front Panel Lockout
Enabled / Disabled
TPM State <Enabled & Activated/Enabled & Deactivated/Disabled&
Activated/Disabled & Deactivated>
TPM Administrative Control
No Operation / Turn On / Turn Off / Clear Ownership
Figure 141. Setup Utility — Security ScreenTable 35. Setup Utility — Security Configuration Screen
Fields
Setup Item Options (Default in
Boldface)
Help Text Comments
A
dministrator Password
Status
<Installed
Not Installed>
Information only. Indicates the
status of the administrator
password.
User Password Status <Installed
Not Installed>
Information only. Indicates the
status of the user password.
Set Administrator
Password
[123aBcD]
A
dministrator password is used to
control change access to the BIOS Setup
Utility.
This option is only to control
access to the setup.
A
dministrator has full access to