Product guide

QSSC-S4R Server System Product Guide Chapter 5: Technician Maintenance
Version 1.0
113
Figure 117. Installing the Front Panel Fan Board
3. Reconnect all cables you disconnected when you removed the front panel fan board.
4. Replace the fan cage. For instructions, see “Installing the Fan Cage” on page 111.
5. Replace all fans. For instructions, see “Installing the Hot-Swap Fan Modules” on page 62.
6. Install the top cover. For instructions, see “Installing the Top Cover” on page 83.
Replacing the Operator Panel
Removing the Operator Panel
1. Remove the top cover.
2. Remove all memory dividers and memory risers.
3. Remove the fan cage.
4. Disconnect the front panel fan board cable from the inside of the chassis, see “1” in the following drawing.
5. Squeeze both sides of the operator panel to release the panel, see “2” in the following drawing.