Product guide

QSSC-S4R Server System Product Guide Chapter 5: Technician Maintenance
Version 1.0
109
3. Insert the hot-swap PCIe slot dividers (“1”) so the rivet holes in the divider base align with the holes in the
main board. Push the captive pin downwards firmly until latched. (“2”). See the following figure.
Figure 113. Installing the PCIe Slot Dividers
4. Connect the power and ground cables from the power distribution board to the connectors on the main
board.
5. Connect all remaining cables to the main board.
6. Install the SAS riser. For instructions, see “Installing the SAS Riser” on page 87.
7. Install the I/O riser. For instructions, see “Removing the I/O Riser” on page 92.
8. Install the processors. See “Handling the Intel® Xeon® Processor 7500 Series ” on page 101 and then
“Installing a Processor” on page 101.
9. Install the center brace. For instructions, see “Installing the Chassis Mid-Brace” on page 99.
10. Install the memory rug. For instructions, see “Installing the Memory Rug” on page 106.
11. Install the memory risers. For instructions see “Installing a Memory Riser” on page 66.
12. Install the memory dividers. For instructions see “Installing the Memory Dividers” on page 95.
13. Install the PCIe cards. For instructions, see “Installing a Non-Hot Swap PCIe Card” on page 84 and
“Installing a Hot Swap PCIe Card” on page 59.
14. Install the top cover. For instructions, see “Installing the Top Cover” on page 83.