Product guide

Chapter 5: Technician Maintenance QSSC-S4R Server System Product Guide
Version 1.0
106
Figure 108. Removing the memory rug
Installing the Memory Rug
1. Remove the top cover. For instructions, see “Removing the Top Cover” on page 82.
2. Remove the memory risers. For instructions, see “Removing a Memory Riser” on page 64.
3. Remove the memory dividers. For instructions, see “Removing the Memory Dividers” on page 95.
4. Place the memory rug in the system. See “1” in the following figure.
5. Tighten the four (4) captive screws. See “2” in the following figure.
Figure 109. Installing the memory rug
6. Replace the memory dividers. For instructions, see “Installing the Memory Dividers” on page 95.
7. Replace the memory risers. For instructions, see “Installing a Memory Riser” on page 66.
8. Replace the top cover. For instructions, see “Installing the Top Cover” on page 83.