Product guide

QSSC-S4R Server System Product Guide Chapter 5: Technician Maintenance
Version 1.0
99
Figure 100. Removing the Chassis Mid-Brace
6. Replace the top cover. For instructions, see “Installing the Top Cover” on page 83.
Installing the Chassis Mid-Brace
1. Remove the top cover. For instructions, see “Removing the Top Cover” on page 82.
2. Remove the memory risers. For instructions, see “Removing a Memory Riser” on page 64.
3. Place the chassis mid-brace into position
4. Tighten the six captive screws.