Product guide

Chapter 5: Technician Maintenance QSSC-S4R Server System Product Guide
Version 1.0
94
Figure 92. Connecting the RMM3 to the I/O Riser end plate
7. Connect one end of the ribbon cable to the J1M1 header on the RMM3 card.
8. Connect the other end of the ribbon cable to header J2A1 on the I/O riser.
Figure 93. Installing the Intel®RMM3
9. Install the I/O riser. For instructions, see “Installing the I/O Riser” on page 92.
10. Install the top cover. For instructions, see “Installing the Top Cover” on page 83.
Removing the Intel®RMM3
1. Remove the top cover. For instructions, see “Removing the Top Cover” on page 82.
2. Remove the I/O riser card. For instructions, see “Removing the I/O Riser” on page 92.
3. Set the I/O riser card on a static-controlled surface with the components facing up.
4. Disconnect the ribbon cable from the Intel®RMM3 card and the I/O Riser.
5. Unscrew the RMM3 from the steel I/O Riser end plate.
6. Install the I/O riser. For instructions, see Installing the I/O Riser” on page 92.
7. Replace the top cover. For instructions, see “Installing the Top Cover” on page 83.