User guide

Q S I 5 0 0 / 6 0 0 S E R I E S U S E R G U I D E
70
Universal‖ under Camera Model and click OK to return to the Camera Control Window.
Click Connect.
Click the Guide tab and again click the black arrowhead to the right of ―Options‖ below the
Stop button and select ―Guider Settings.‖ Select ―Guider Relays‖ in the ―Control Via‖ pop-up
list under Autoguider Output. This instructs MaxIm to send the autoguider control signals
through the Guider port on the QSI 500 Series camera now being used as the autoguider.
Click OK to close the Guider Settings window and return to the Guide tab of the Camera
Control Window.
Everything else in the section above Using an Autoguider applies when using the QSI
500/600 Series camera as the autoguider. Continue with Using an Autoguider above for
additional details.
Note: For complete instructions on guiding, including a step-by-step tutorial,
please see the Online help in MaxIm LE.