Specifications

49
LOUDSPEAKERS
WLWX Weatherized WideLine™
Installed Sound
WL2102-wx
The WL2102-wx is a weather resistant, installation
version of the WideLine-10 WL2102-w line array. All
portable rigging hardware is removed and replaced
with four female M10 fittings (eight total) mounted
to either end of the enclosure. The loudspeaker is
designed for 3-way operation only and no handles
are provided. An adjustable, external, bolt-on rigging
system for box-to-box connection and adjustment
of splay angles is included.
The AF2102-wx is a compatible, aluminum array
frame for use when suspending the WL2102-wx. Array
frames for the standard WL2102-w are not compatible
with the WL2102-wx.
WL3082-wx
The WL3082-wx is a weather resistant, installation
version of the WideLine-8 WL3082 line array. All
portable rigging hardware is removed and replaced
with four female M10 fittings (eight total) mounted to
either end of the enclosure. The loudspeaker is
designed for 3-way operation only. An adjustable,
external, bolt-on rigging system for box-to-box
connection and adjustment of splay angles is included.
The AF3082-wx is a compatible, aluminum array
frame for use when suspending the WL3082-wx. Array
frames for the standard WL3802 are not compatible
with the WL3082-wx.
GP218-wx
The GP218-wx is a weather resistant, installation
version of the WideLine-10 GP218 subwoofer. The
standard version includes no suspension provisions
but M10 suspension points may be added on request.
Enclosure Construction
WideLine-wx models are constructed using premium
birch plywood which is fully encapsulated in fiberglass.
The input connector plate is replaced by a hard wired,
captive, UV resistant, outdoor-rated (direct burial)
cable with a gland-nut through the cabinet for
water-proofing. The cable will be 3 meters in length
unless otherwise specified at the time the order is
placed. Grilles are stainless steel, covered in outdoor
rated, vinyl coating and lined with acoustic foam and a
fine woven stainless steel mesh.
Delivery
WideLine WX models are strictly built to order. Please
allow 90 days plus shipping time from the time the
P.O. is received by QSC for delivery.
WL2102-wx WL3082-wx GP218-wx
System Type Tri-amp line array element Tri-amp line array element 2 x 18" vented subwoofer
Frequency Range (-10 dB) 48 Hz – 20 kHz 62 Hz – 20 kHz 27.4 Hz –1.2 kHz (without processing)
Frequency Response (±3 dB) 55 Hz – 18 kHz 68 Hz – 18 kHz 31.4 Hz – 240 Hz (without processing)
Nominal Coverage 140° H 140° H N/A
Power Handling
1
LF / MF
600 W 250 W 1700 W
HF 80 W 85 W N/A
Peak Output
2
LF / MF
127 dB / 133 dB 122 dB / 128 dB 141 dB
Driver Information
LF
2 x 10" transducer, 3" voice coil, ferrite magnet 2 x 10" transducer, 3" voice coil, ferrite magnet 2 x 18" transducers, 4" voice coil, ceramic magnet
HF 3" titanium diaphragm, neodymium magnet 3" titanium diaphragm, neodymium magnet N/A
Input Connectors Tinned, bare wire Tinned, bare wire Tinned, bare wire
Suspension / Attachment Point
Integral rigging system, vertical splay adjustable
in 1° increments from 0°-10°
Integral rigging system, vertical splay adjustable
in 1° increments from 0°-10°
None (M10 points available by request)
Dimensions (HWD) inches 11.75" x 27.25" x 18.5" 9.5" x 20" x 15.5" 21.13" x 30.13" x 47.32"
Dimensions (HWD) mm 298 mm x 692 mm x 470 mm 241 mm x 508 mm x 394 mm 537 mm x 765 mm x 1202 mm
Net Weight 92.5 lb / 42 kg 61 lb / 27.7 kg 215 lb / 97.5 kg
1 Continuous IEC specified test signal, 2 hours bi-amp mode unless otherwise stated.
2 Calculated at 1 m using power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
RoHS