User manual

9
EN
MIC/LINE In
The Page Station rear panel includes an auxiliary MIC/LINE input for support of a secondary microphone or other audio source. The MIC/LINE
accepts a Euro style (Phoenix) three-terminal plug, included in the Page Station package. Follow the Page Station rear panel pin-out labels (Figure 4)
for wiring. Figure 5 and Figure 6 indicate appropriate termination practices for balanced and unbalanced applications.
AUX POWER
The Page Station rear panel includes a receptacle for connecting a +24 VDC/500 mA power source. This is an optional supply source to power the
Page Station, and can be used as the only power source or as a backup power source should PoE fail. The power receptacle on the rear panel of the
Page Station accepts a Euro style (Phoenix) two-terminal plug (Figure 7), included in the Page Station package. Follow the Page Station rear panel pin-
out label (Figure 8) when connecting to this receptacle.
CAUTION!: The power supply used to provide 24 VDC power to the unit shall be a UL Listed ITE power supply, marked LPS, or a UL Listed
direct plug-in power unit, marked Class 2, with a rated output of 24 VDC/500 mA.
Microphone Connector
• RJ45 connector for hand-held microphone models.
• XLR connector for gooseneck microphone models.
Strain relief
Secures the cord of the handheld microphones to remove any stress to the RJ45 connector.
Q-LAN Network
Connect one end of a data communications cable (CAT-5e rating or better) terminated with an RJ45 connector into the LAN A (and optionally the
LAN B) connector on the rear panel of the Q-Sys Page Station (Figure 9). Ensure that the lock tab on the cable's connector engages with the RJ45
connector on the rear panel. Ensure that the mating network switch port offers IEEE 802.3af compliant power if powering the Page Station via PoE.
Refer to the Q-Sys online help for Networking details.
— Figure 4 —
— Figure 5 — — Figure 6 —
POS
NEG
Balanced Unbalanced
AUX POWER
+24 VDC
— Figure 7 — — Figure 8 —
— Figure 9 —