Specifications

61
I-282H
The QSC I-282H is a dual 8", 2-way, full-range
loudspeaker that is well suited to applications in which
moderate levels and very high-quality sound
reinforcement are required. Pole mounted, truss
mounted, or used as a floor monitor/stage fill, these
injection molded speakers are an excellent choice for
musicians, mobile entertainers, and anyone else
needing a high-quality, lightweight SR package that
sounds superb, is visually unobtrusive, and with its
built-in handles, is easy to transport.
The I-282H enclosure incorporates two 8" weather
resistant, LF transducers and a 1" exit HF compression
driver. Bi-amplified or full-range operation may be
selected by means of a rear-panel switch. The HF
driver is coupled with QSC’s unique Advanced
Directivity™ rotatable waveguide — enabling the
loudspeaker to deliver well-controlled coverage,
regardless of its orientation.
An ideal solution for a variety of mobile SR
applications, the I-282H includes a cup for pole
mounting. By using the included yoke mount with
swivel extension feet, the I-282-H can be vertically or
horizontally mounted for pan and tilt focusing or used
as a floor monitor. For truss mounting, the yoke
accepts most industry standard truss clamps.
I-282H Accessories Included
• YokeMount
I-82H I-282H
System Type
Compact 2-way,
ported enclosure
Compact 2-way,
ported enclosure
Frequency Range
(-10 dB)
60 Hz – 22 kHz 60 Hz – 29.5 kHz
Frequency Response
(-6 dB)
80 Hz – 21 kHz 80 Hz – 27.7 kHz
Nominal Coverage 90°H x 60°V (rotatable) 90°H x 60°V (rotatable)
Power Capacity
1
/ Sensitivity
2
/ Peak SPL
3
Full Range 240 W (8 hrs) / 90.5 dB / 120 dB 450 W (8 hrs) / 93 dB / 126 dB
Driver Information
LF
8" high power treated
paper cone, 2" voice coil,
neodymium magnet
8" high power treated
paper cone x 2, 2" voice coil,
neodymium magnet
Driver Information
HF
1" exit compression driver
1" exit compression driver,
1.7" voice coil
Input Connectors NL4 in parallel x 2 NL4 in parallel x 2
Suspension / Attachment Point
Yoke mount optional, pole mount
socket, mike stand adapter included
Yoke mount, pole mount socket,
mike stand adapter included
Dimensions (HWD)
inches
17.4" x 10" x 11.2" 26.17" x 11.44" x 10.21"
Dimensions (HWD)
mm
442.0 mm x 254 mm
x 284.5 mm
561 mm x 686 mm
x 768 mm
Net Weight (each) 17.5 lb / 7.9 kg 28.5 lb / 12.9 kg
1 Continuous IEC specified test signal, 2 hours unless otherwise stated.
2 Based on nominal impedance, measured in full space. 1 W @ 1 m.
3 Calculated using specified power capacity and system sensitivity.
6 dB peak-to-average signal ratio assumed.
RoHS
LOUDSPEAKERS