Specifications

57
LOUDSPEAKERS
AD-S32T AD-S52 AD-S52T
AD-S82
(standard output)
AD-S82H
(high output)
AD-S282H AD-S282HT
System Type
Compact 2-way,
surface mount, ported
loudspeaker system
Compact 2-way,
surface mount, ported
loudspeaker system
Compact 2-way,
surface mount, ported
loudspeaker system
Compact 2-way,
surface mount, ported
loudspeaker system
Compact 2-way,
surface mount, ported
loudspeaker system
Compact 2-way,
surface mount, ported
loudspeaker system
Compact 2-way,
surface mount, ported
loudspeaker system
Frequency Range
(-10 dB)
65 Hz – 20 Hz 60 Hz – 20 kHz 60 Hz – 20 kHz 65 Hz – 19 kHz 60 Hz – 22 kHz 60 Hz – 29.5 kHz 60 Hz – 29.5 kHz
Frequency Response
(±3 dB)
73 Hz – 20 kHz 75 Hz – 19 kHz 75 Hz – 19 kHz 85 Hz – 18 kHz 80 Hz – 21 kHz 80 Hz – 27.7 kHz 80 Hz – 27.7 kHz
Nominal Coverage 100°H x 100°V 90°H x 90°V 90°H x 90°V
90°H x 60°V
(rotatable)
90°H x 60°V
(rotatable)
90°H x 60°V 90°H x 60°V
Full Range
Power Capacity
1
Sensitivity
2
Peak SPL
3
30 W (100 hrs)
85 dB
105 dB
60 W (100 hrs)
86.5 dB
110 dB
60 W (100 hrs)
86 dB
107 dB
110 W (8 hrs)
90.5 dB
117 dB
240 W (8 hrs)
90.5 dB
120 dB
450 W (8 hrs)
93 dB
125 dB
450 W (8 hrs)
93 dB
125 dB
Driver Information
LF
3" weather resistant,
polypropylene cone
woofer
5.25" shielded,
weather-resistant
5.25" shielded,
weather-resistant
8" fiberglass cone,
1 1/4" voice coil
8" high-power treated
paper cone,
2" voice coil,
neodymium magnet
8" high-power treated
paper cone x 2,
2" voice coil,
neodymium magnet
8" high-power treated
paper cone x 2,
2" voice coil,
neodymium magnet
HF 0.75" neodymium tweeter 1" neodymium tweeter 1" neodymium tweeter
1" titanium dome tweeter,
neodymium magnet
1" high output
compression driver
1" high output
compression driver
1" high output
compression driver
Controls / Selectors
70 V: 30, 15, 7.5, 3.8 W
100 V: 30, 15, 7.5 W
8Ω Selectable
Rotary Knob
N/A
70 V: 30, 15, 7.5 3.75 W
100 V: 30, 15, 7.5 W
8Ω Selectable
Rotary Knob
N/A N/A N/A
70 V: 200, 100, 25, 20 W
100 V: 200, 100, 50 W
8Ω Externally
Selectable
Input Connectors Screw terminals
5-way binding
posts x 2
5-way binding
posts x 2
Concealed 5-way
binding posts x 2,
IntelliDock mounting/
connection system
Concealed 5-way
binding posts x 2,
IntelliDock mounting/
connection system
Barrier Strip
(switchable: passive/active)
Barrier Strip
Suspension /
Attachment Point
N/A N/A N/A N/A N/A
OmniMount Pro60.0
Attachment
OmniMount Pro60.0
Attachment
Dimensions (HWD)
inches
7.9" x 4.8" x 5.5" 11.3" x 7.0" x 8.3" 11.3" x 7.0" x 8.3" 17.4" x 10.0" x 11.2" 17.4" x 10.0" x 11.2" 26.2" x 10.2" x 11.4" 26.2" x 10.2" x 11.4"
Dimensions (HWD)
mm
201 mm x 122 mm
x 140 mm
287 mm x 178 mm
x 212 mm
287 mm x 178 mm
x 212 mm
445 mm x 255 mm
x 285 mm
445 mm x 255 mm
x 285 mm
445 mm x 255 mm
x 285 mm
445 mm x 255 mm
x 285 mm
Weight (each) 4 lb / 1.8 kg 15 lb / 6.8 kg 18 lb / 8.2 kg 16.9 lb / 7.4 kg 16.2 lb / 7.7 kg 27.7 lb / 12.6 kg 27.7 lb / 12.6 kg
1 Continous IEC specified test signal, 2 hours unless otherwise stated.
2 Based on nominal impedance, measured in full space. 1 W @ 1 m.
3 Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
RoHS
while simultaneously making electrical connections.
This unique and innovative design reduces installation
time and wiring, while decreasing the risk of theft. Four
mounting configurations are available, including a
standard yoke mount.
Available AD-S82 Mounting Accessories
• ID-8|ID-8TIntelliDock
• YM-8|YM-8TYokeMount
AD-S282H | S282HT
When additional low-frequency performance and
higher acoustical output are required, choose the
dual-8" AD-S282H with 1" exit compression driver. For
mounting flexibility, a yoke bracket is included. The
AD-S282HT includes a 70/100 volt transformer for
distributed systems. A rear panel switch selects the
power level or bypasses the transformer for 8Ω
operation, providing greater flexibility than many
competing products.
sports bars, convention facilities, and multimedia
environments. Its magnetically shielded low-frequency
driver is suitable for use near CRT monitors.
The AD-S82 is a 2-way system housed in a weather
resistant, ported enclosure made from injection-molded,
high-impact polystyrene. The low-frequency transducer
is an 8" weatherproof driver with a heavy-duty
double-roll cloth surround. For applications requiring
higher power handling and acoustic output, the
ADS82H (High Output) replaces the 1" titanium
dome tweeter used in the AD-S82 with a 1" exit
compression driver. Both models use a 90° x 60°
version of QSC’s patented, rotatable Advanced
Directivity™ waveguide. Both are available with or
without a 70/100 volt transformer.
QSC’s IntelliDock™ intelligent mounting system sets a
new standard for ease of installation and security. The
IntelliDock system includes everything necessary to
mount, wire, and position the speaker. A single step
locks the speaker securely onto the docking station