Specifications

40
*Patent No. 7,177,437
Flexible Arrays
An elegantly simple 4-point suspension system
combined with light weight, compact size and
excellent handling ergonomics mean that one
crewperson can easily deploy an array. A single
AF3082-L array frame suspends up to twelve line
array elements or up to twelve line array elements
plus four subwoofers.
Arrays can be assembled using only WL3082
elements for events where extreme low end below
62 Hz is not required. For additional subbass impact,
WL212-sw subwoofers can be flown at the top of the
array, or behind the fullrange array by utilizing the
EB3082 extension bar.
Arrays of up to twelve WL3082 modules, with four
WL212-sw subwoofers flown behind can be
accommodated by the combination of 2 x AF3082-S
small array frames and a single EB3082 extension bar.
As many as twelve WL3082 modules can be
suspended using one AF3082-S while the AF3082-L
large array frame can be used to assemble arrays of up
to twelve WL3082 modules alone or suspended below
up to four WL212-sw subwoofers. The AF8-10 adapter
frame allows the user to add WL3082 WideLine-8
arrays beneath WL2102 WideLine-10 arrays. The
PB3082 pullback bar can be used to attain extra
downangle in flown arrays or as a suspension bar for
arrays of up to eight WL3082 modules.
*Note:InapplicationwheretheAF3082-S(smallarray
frame) is utilized, a PB3082 (pull-back bar) will be required
for setting the array angle (focusing) of each array.
WideLine-8
Line Array System
Concert Systems
Installed Sound
WL3082
Designed for the most demanding concert and
installation audio professionals, the WideLine™
WideLine-8 system packs full size line array performance
into an ultra compact package measuring less than
20" (508 mm) wide and 9" (229 mm) high.
WideLine-8 fits “difficult” venues with height or
sightline restrictions that limit the placement and size
of the array. It eases transport requirements to avoid
rising fuel costs.
Each tri-amplified WideLine-8
element uses a pair of high-
power neodymium 8"
low-frequency drivers. Both
generate the low frequencies,
but to maintain wide 140°
horizontal coverage at crossover, only one extends into
the mid-range. High frequencies are handled by a 3"
diaphragm, neodymium compression driver on QSC’s
patented* multiple aperture diffraction slot
waveguide. Enclosures are Baltic birch plywood with
an environmentally friendly, field-repairable
waterborne polymer finish and lightweight, rustproof
aluminum suspension fittings.
WL3082 shown hung
from AF3082-S.
LOUDSPEAKERS