Specifications

38
ILA Series v2
Installation Line Array
Installed Sound
Most line array systems are designed for touring
applications which require extreme ruggedization
and expensive suspension hardware. By focusing on
installation applications QSC drove cost out of the
ILA System while retaining the performance of
high-end touring line array systems. ILA System v2
takes this concept and builds on it by offering a
complete and accessible solution consisting of
processing, amplification, line array, subwoofer
and suspension accessories.
WL2082-i
Each Installation Line Array element uses a pair of
high-power, neodymium magnet, 8" diameter
low-frequency drivers. For high frequencies, a pair of
1.75" (voice coil diameter) neodymium compression
drivers with titanium domes are mounted on a
patented* multiple aperture diffraction waveguide that
provides extremely wide coverage (140º). As a result,
a WL2082-i system will rarely require additional side
or center fill speakers and solid stereo imaging is
preserved across the entire listening area.
Available in black or white, the WL2082-i enclosure is
made of high impact polystyrene with extensive internal
ribs to eliminate acoustic losses due to sidewall flex.
The Installation Line Array may be used in outdoor
applications where the system is not directly exposed
to the elements.
WL118-sw Subwoofer
The WL118-sw is a single 18" version of the popular
WideLine-10 touring, dual 18" subwoofer. ILA subs
may be suspended at the top of an ILA array using the
standard FB2082-i array frame. When trim height is
limited, the ILA sub may be suspended behind the
array using the available EB2082-i extension bar.
GP118-sw Subwoofer
The GP118-sw omits the ILA compatible suspension
hardware but retains the identical acoustical
performance of the WL118-sw at a lower cost. Each
GP118-sw includes a total of eight (8) threaded
M10 inserts for single box suspension in permanent
installations. In ground-supported applications,
multiple units can be stacked vertically utilizing the
interlocking feet and recess features machined into
the enclosures top panel. Also included on the GP
version is a screw-in (M20) pole mount to provide
flexibility as a “Sub-Sat” system when used with
full-range pole mount speakers such as K or KW.
*Patent No. 7,177,437
WL2802-i with WL118-sw
using EB2082-i extension
bar and FB2082-i fly-bar.
LOUDSPEAKERS
GP118-sw