Specifications

14
AMPLIFIER ACCESSORIES
Amplifier Accessories
DSP-3 | DSP-4 | DSP-30
The DSP-3 and DSP-4 are compact, 2-channel signal
processing modules that can plug into the back of
most DataPort-equipped QSC amps to conserve rack
space and simplify interconnection. They can also be
mounted into a DPX-4 remote rack mounting bracket
for use as a standalone, rack-mounted processing unit.
The DSP-3/4 are professional audio processors
featuring 24-bit/48 kHz A/D converters, balanced
inputs, and presets that can be selected without
turn-on pops or zipper noise. Their processing power
is dynamically allocated, removing the limitations
imposed by fixed signal-chain designs. The power and
flexibility of the DSP-3/4 eliminates expensive
outboard DSP gear, which reduces cost and installation
time and simplifies setup.
The DSP-30 is a rack-mount device almost identical to
the DSP-3. The other main differences between these
three devices are their dynamic range specifications
and output connectors.
Our PC-based Signal Manager software uses simple
drag-and-droptoolsto:
• Configuretheprocessingfunctionsandsignalflow.
• DisplayagraphicalrepresentationofDSPresources.
• Producehardcopyprintoutofsignalflowand/or
parameter settings.
• PerformfirmwareupgradesviaRS-232.
Eachchannelincludes:
• Crossoverfilters:Bessel,Butterworth,Linkwitz-Riley.
• Compressorsandlimiters.
• MultipleparametricEQs.
• Precisionattenuation(0.1dBsteps).
• Highandlow-shelffilters.
• Mixpost-crossoveraudio(2-to-1mixer).
• Multipledelays(max.910ms).
• Variable-frequencytonegenerator.
• Pinkandwhitenoisegenerators.
• Signalmute,splitter,andpolarityreversal.
The DSP is configured with an easy-to-use software
interface. Signal processing icons from the toolbar are
dropped onto the workspace and the signal path is
routed with simple drawing tools.
Model Dynamic Range (unweighted) Output Connectors
DSP-3 >93 dB, 20 Hz to 20 kHz 3-pin Euroblock
1.5, 4, 9 V sensitivities
DSP-4 >104 dB 20 Hz to 20 kHz, XLR
1.5, 4, 9 V sensitivities
DSP-30 >95 dB 20 Hz to 20 kHz, XLR
1.5, 4 and 9 V sensitivities
RoHS
DSP-30