Multifunction Controller Quick Start Guide MP-MFG-NA-WH / MP-MFG-NA-BK / MP-MFG-EU-WH / MP-MFG-EU-BK (NA = North American / EU = European / BK = Black / WH = White) EXPLANATION OF SYMBOLS The term "WARNING!" indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death. The term "CAUTION!" indicates instructions regarding possible damage to physical equipment.
IMPORTANT SAFETY INSTRUCTIONS 1. 9. 10. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation opening. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Only use attachments/accessories specified by the manufacturer.
RoHS Statement The MP-MFC-EU-BK, MP-MFC-EU-WH, MP-MFC-NA-BK, and MP-MFC-NA-WH products are in compliance with European Directive 2011 /65/EU - Restriction of Hazardous Substances (RoHS). The MP-MFC-EU-BK, MP-MFC-EU-WH, MP-MFC-NA-BK, and MP-MFC-NA-WH products are in compliance with "China RoHS" directives per GB/T26572. The following table is provided for product use in China and its territories: MP-MFC-EU-BK, MP-MFC-EU-WH, MP-MFC-NA-BK, MP-MFC-NA-WH *91J, ~~~~~.
Contents Part Name Quantity Shipped Electrical box {1-gang - closed box) NA or International Not Supplied Cables - RJ45, CAT-5 Not Supplied MP-MFC Unit/ Termination plug / 2 machine screws with pushnuts (installed) for metal electrical box. 2 thread-forming screws for plastic electrical box / 2 push-nuts (North American) 1 Kit (NA or Int.) MP-MFC Unit / Termination plug (International) Trim-plate/ 2 screws (North American) 1 Kit (NA or Int.
Installation A 1. 2. 1 Run cables NOTE: Use closed electrical box. Run Cables; provide for stress relief. a. From MP-M or previous MFG unit b. To next daisy-chained MFG unit, or Termination plug. Connect cables a. From MP-Mor previous MFG in a daisy-chain b. To next daisy-chained MFG unit or c. Termination Plug, required on last MFC in a daisy-chain. _________ ,____ 2 Connect cables and termination plug North American Installation A CAUTION!: Do not . .
4. Install trim plate (use two supplied screws). 4 Install trim plate f;f> _•.
Contact DSC QSC, LLC 1675 MacArthur Boulevard Costa Mesa, CA 92626-1468 USA Main Number: +1.714.754.6175 Toll Free 800 854.4079 (US Only) Website: www.qsc.com Sales and Marketing: + 1.714.957.7100 or toll free (USA only) 800.854.4079 FAX:+1.714.754.6174 E-mail: info@qsc.com Customer Service +1.714.957.7150 or toll free (USA only) 800.772.2834 FAX: + 1.714.754.6173 E-mail: service@qsc.com © 2018 QSC, LLC. All rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S.
QSC Hardware Limited Warranty By buying, using and/or installing the QSC Product, you are agreeing to be bound by the terms of the QSC Hardware Limited Warranty ("Warranty") as set out below. Do not use your product until you have read the Terms of the Warranty.
g. Cosmetic damage, including scratches, dents, and broken plastic, h. Conditions caused by normal wear and tear or otherwise due to the normal aging of the QSC Product, Damage caused by use with another product, j. Product that was purchased from an unauthorized seller or online vendor, or k. Product on which any serial number has been removed, altered or defaced. Other questions regarding this Warranty can be answered by calling: Within US and Canada: +1(800) 854-4079 Outside the U.