Specifications

27
CX 302V CX 602V CX 1202V
OUTPUT POWER in watts
20 Hz–20 kHz @ 0.05% THD
@ 70V 200 400 800
@ 8Ω per channel 550 700
@ 4Ω per channel 1100
EIA: 1 kHz @ 0.05% THD
@ 70V 250 440 1000
EIA: 1 kHz @ 0.1% THD
@ 70V 300 600 1200
Bridge Mono:
140V, 20 Hz–20 kHz, 0.1% THD 400 800 850
140V, 1 kHz, 0.1% THD 600 1200 2400
16Ω, 20 Hz–20 kHz, 0.1% THD 1200 1400
8Ω, 20 Hz–20 kHz, 0.1% THD 2300
DYNAMIC HEADROOM 2 dB @ 4Ω
DISTORTION
SMPTE-IM < 0.02%
FREQUENCY RESPONSE 20 Hz–20 kHz, ±0.2 dB
(at 10 dB below rated output power) -3 dB points: 5 Hz and 100 kHz
DAMPING FACTOR > 500 @ 8Ω
NOISE (unweighted 20 Hz to 20 kHz, below rated output) 106 dB
VOLTAGE GAIN 56.6× (35 dB)
INPUT SENSITIVITY, V RMS
full 70.7V output 1.26v (+4.2 dBu)
INPUT CLIPPING, V RMS 10v (+22.2 dBu)
INPUT IMPEDANCE 6 KΩ unbalanced
12 KΩ balanced
CONTROLS Front: AC switch, Ch. 1 and Ch. 2 gain knobs with 21 detents
Rear: 10-position DIP switch
INDICATORS POWER: Green LED CLIP: Red LED, 1 per channel
PARALLEL: Yellow LED -10 dB: Green LED, 1 per channel
BRIDGED: Yellow LED -20 dB: Green LED, 1 per channel
SIGNAL: Green LED, 1 per channel
CONNECTORS Input: XLR, pin 2 positive; detachable "Euro-style" terminal blocks
Output: Barrier strip
COOLING Forced-air, with fan speed fully variable from off to full; back-to-front air flow
AMPLIFIER PROTECTION Full short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads
LOAD PROTECTION Turn-on/turn-off muting, DC-fault power supply shutdown, clip limiting
OUTPUT CIRCUIT TYPE AB AB H
AB: Class AB complementary linear output
H: Class AB complementary linear output with Class H 2-step high efficiency circuit
DIMENSIONS 19.0" (48.3 cm) wide, 3.5" (8.9 cm) tall (2 rack spaces)
14.0" (35.6 cm) deep (rack mounting to rear support ears)
WEIGHT Shipping: 27 lbs (12.3 kg) Net: 21 lbs (9.5 kg)
POWER REQUIREMENTS Available for 120 or 220–240 VAC, 50/60 Hz
Specifications