User manual

39
CX 302V CX 602V CX 1202V CX 204V
OUTPUT POWER in watts
20 Hz–20 kHz @ 0.05% THD
@ 70V 200 400 800 200
@ 8Ω per channel 550 700
@ 4Ω per channel 1100
EIA: 1 kHz @ 0.05% THD
@ 70V 250 440 1000 220
EIA: 1 kHz @ 0.1% THD
@ 70V 300 600 1200
EIA: 1 kHz @ 1% THD
@ 70V 300
Bridge Mono:
140V, 20 Hz–20 kHz, 0.1% THD 400 800 850 400
140V, 1 kHz, 0.1% THD 600 1200 2400 440
16Ω, 20 Hz–20 kHz, 0.1% THD 1200 1400
8Ω, 20 Hz–20 kHz, 0.1% THD 2300
CHANNELS 2224
DYNAMIC HEADROOM 2 dB @ 4Ω
DISTORTION
SMPTE-IM < 0.02%
FREQUENCY RESPONSE 20 Hz–20 kHz, ±0.2 dB
(at 10 dB below rated output power) -3 dB points: 8 Hz and 100 kHz
DAMPING FACTOR > 500 @ 8Ω
NOISE (unweighted 20 Hz to 20 kHz, below rated output) 106 dB
VOLTAGE GAIN 56.6× (35 dB)
INPUT SENSITIVITY, V RMS
full 70.7V output 1.26v (+4.2 dBu)
INPUT IMPEDANCE 6 KΩ unbalanced
12 KΩ balanced
CONTROLS Front: AC switch, Ch. 1 and Ch. 2 gain knobs with 21 detents
Rear: 10-position DIP switch
INDICATORS POWER: Green LED CLIP: Red LED, 1 per channel
PARALLEL: Yellow LED -10 dB: Green LED, 1 per channel
BRIDGED: Yellow LED -20 dB: Green LED, 1 per channel
SIGNAL: Green LED, 1 per channel
CONNECTORS Input: XLR pin 2 positive; detachable "Euro-style" terminal blocks
Output: Barrier strip
COOLING Forced-air, with continuously variable speed fan; back-to-front air flow
AMPLIFIER PROTECTION Full short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads
SPECIFICATIONS SPÉ CIFICATIONS TECHNISCHE DATEN ESPECIFICACIONES