Le Moyne College Athletic Complex Soccer Field 19100 Equipment Technical Data Sheets Audio-Video Consulting & Contracting Remote Recording Tour Support and Logistics BEICKERT AUDIO 219 Arnold Ave, Syracuse, NY 13210
SECTIONAL WALL CABINETS Standard Series 19" Wall Cabinets 300 Series Racks FEATURES • Sturdy wall-mount cabinet protects equipment and saves valuable floor space • Selection includes models with 12" and 15" deep center mounting sections • Reinforced frame flanges, plus corner-brace structural supports and electric-welded seams & miters provide stability for mounted equipment • Punched vents assure heat dissipation • Wire management provisions allow organized wire access • Adjustable mounting rails provide
Fig. 1:Rear Section Mounting Holes Knockouts (Note: -61 Models have 8 mounting holes) 20.82 16.00 MOUNTING HOLES 4.00 MOUNTING HOLES GENERAL DESCRIPTION The 300 Series wall cabinets are distinguished by center-section depths of 12" and 15", respectively. Basic model includes three, 16-gauge CRS sections which include a 2" deep, solid-steel front door, a 12" or 15" deep center section with adjustable mounting rails, and a 41⁄2" deep rear door.
Fig. 3: Rear Section Top & Bottom Flange Conduit Knockout Array .50-.75 COMBO KNOCKOUT 1" KNOCKOUT 2.88 1.50 4.50 Ventilation Stamped perforated vents, located on both sides (top and bottom) of the center section, provide maximum ventilation for rack-mounted electronics (four vent patterns per side on 12" deep series, eight per side on 15" deep.) Structural Support Series 300 cabinets offer exceptional structural support.
INSTALLATION Fig. 6: Minimum mounting space required to facilitate opening center section 90° with front door closed. Fig. 5: Minimum mounting space required to facilitate opening center section 90° with front door open. 12 35-1/4" 30015 38-1/4" 300- ace) g Sp in. Mountin 12 54-1/8" 30015 57-1/4" 300- ace) Sp g in. Mountin (M (M A B C D 6" E A) Mounting Rail Supports Installation Placement Considerations B) Corner Brace Supports • Determine left/right swing distance to adjacent walls.
WALL MOUNT ENCLOSURE 600-12 FEATURES • 16 Gauge CRS all welded construction with 11guage CRS tapped mounting rails • Locking front door • Vents on each side • 10-32 pan head screws for panel mounting • Completely assembled • Convenient Pre-Punched Back Panel for Wall Mounting GENERAL DESCRIPTION Atlas Sound Model 600-12 is a surface mounting wall cabinet used for housing small electronic system installations including 19" wide amplifiers, tuners and associated communication controls for schools, churches
DESK AND BANQUET STANDS DS Series FEATURES • Versatile Stands Fulfill Functional and Aesthetic Miking Requirements for Microphone Placement • Quality Construction Assures Extended Service and Quality Appearance • Weighted Bases Provide Maximum Stability APPLICATIONS Atlas Sound microphone stands meet functional and aesthetic requirements for microphone support and placement within contemporary and traditional decors.
MS-10C MS-10CE ALL-PURPOSE MICROPHONE FLOOR STANDS FEATURES • Economical, Industry Standard Floor Stands Suitable for a Variety of Applications • Wearproof, Three-Piece Clutch Offers Secure, Fast, and Noise-Free Height Adjustment • Edge-Concentrated, One-Piece Circular Base Ensures Maximum Stability • Available in Choice of Chrome or Non-Reflective Ebony Epoxy Finish • Field Serviceable Parts Guarantee Long Product Life Steel tubing is finished in a choice of mirrored chrome or non-reflective ebony epoxy
ACCESSORIES BOOM ATTACHMENTS BB-28X(E) BB-77(E) PB11X(E) PB15(E) PB21X(E) PB25 PB25X Adj. 26 1⁄4" - 383⁄4" Length, Chrome (Ebony) Fixed 34" Length, Fixed 3⁄4 lb. Counterweight, Chrome (Ebony) Adj. 16 1⁄4" – 24 1⁄2" Length, Fixed 3⁄4 lb. Counterweight, Chrome (Ebony) Fixed 34" Length, Counterweight, Fixed 3⁄4-lb. Chrome (Ebony) Adj. 25 1⁄4" – 38 1⁄2" Length, Fixed 3⁄4 lb. Counterweight, Chrome (Ebony) Fixed, 34 1⁄2" Length, Adj. 2 lb. Counterweight, Chrome Adj. 32" – 51 1⁄2" Length, Adj. 2 lb.
1217B Paired - Flexible, Low-Capacitance Cable For more information please call 1-800-Belden1 See Put-ups and Colors Related Documents : No. 7 for Snake Cables.pdf Description: 22 AWG stranded (7x30) TC conductor, Datalene® insulation, individually shielded with Beldfoil® (100% coverage), numbered/colorcoded PVC jackets, pair jackets and shields bonded to both strip simultaneously with automatic stripping equipment.
17B Paired - Flexible, Low-Capacitance Cable Inner Jacket Material PVC - Polyvinyl Chloride Inner Jacket Nominal Wall Thickness .015 in. Inner Jacket Diameter .153 in. Inner Jacket Color Code Chart : Number 1 2 Color Brown Red Number 3 4 OUTER JACKET: Outer Jacket Material PVC - Polyvinyl Chloride Outer Jacket Nominal Wall Thickness .040 in. Outer Jacket Ripcord Yes OVERALL NOMINAL DIAMETER: Overall Nominal Diameter .458 in.
1217B Paired - Flexible, Low-Capacitance Cable Notes Datalene® insulation features include a low dielectric constant and a low dissipation factor for high-speed, low distortion data handling. Physical properties include good crush resistance and light weight. Pair jackets and shields are bonded so both strip simultaneously with automatic stripping equipment. PUT-UPS AND COLORS: Item Description 1217B B591000 4 PR #22 FHDPE FS PVC PVC 1217B B59500 4 PR #22 FHDPE FS PVC PVC Put-Up (ft.
Detailed Specifications & Technical Data ENGLISH MEASUREMENT VERSION 1311A Multi-Conductor - Speaker Cable Description: 12 AWG stranded (7x24x34) high-conductivity bare copper conductors, PO insulation, PVC jacket. Sequential footage marking every two feet. Usage (Overall) Suitable Applications: Speaker Cable, Direct Burial, Indoor/Outdoor Home Theater, In-Wall Speaker, Outdoor Speaker Physical Characteristics (Overall) Conductor AWG: # Conductors AWG Stranding Conductor Material 2 12 7x24x34 Dia.
Detailed Specifications & Technical Data ENGLISH MEASUREMENT VERSION 1311A Multi-Conductor - Speaker Cable EU Directive 2000/53/EC (ELV): Yes EU Directive 2002/95/EC (RoHS): Yes EU RoHS Compliance Date (mm/dd/yyyy): 07/01/2005 EU Directive 2002/96/EC (WEEE): Yes EU Directive 2003/11/EC (BFR): Yes CA Prop 65 (CJ for Wire & Cable): Yes MII Order #39 (China RoHS): Yes Flame Test UL Flame Test: UL1581 Vertical Flame and FT-1 Flame Test CSA Flame Test: FT1 Suitability Suitability - Indoor: Ye
B R I L L I A N C E® B R O A D C A S T C A B L E S 19.36 Speaker Wire and Cable Low-Capacitance Oxygen-Free, High-Conductivity (OFHC) Speaker Cable Twisted Jacketed Construction Description Part No. UL NEC/ C(UL) CEC Type Standard Lengths No. of Cond. Ft. m Standard Unit Weight Lbs. kg Insulation Thickness Inch mm Jacket Thickness Inch mm Nominal OD Inch mm Nominal Capacitance* pF/Ft.
7919A Paired - Category 5e DataTuff® Twisted Pair Cable For more information please call 1-800-Belden1 See Put-ups and Colors Related Documents : Termination Instructions for Shielded UTP.pdf Description: 24 AWG solid bare copper conductors, twisted pairs, polyolefin insulation, overall Beldfoil shield (100% coverage), 24 AWG stranded TC drain wire, industrial grade sunlight- and oil-resistant PVC jacket, rip cord.
7919A Paired - Category 5e DataTuff® Twisted Pair Cable Outer Shield Drain Wire Stranding 7x32 Outer Shield Drain Wire Conductor Material TC - Tinned Copper OUTER JACKET: Outer Jacket Material Industrial Grade PVC - Polyvinyl Chloride Outer Jacket Ripcord No OVERALL NOMINAL DIAMETER: Overall Nominal Diameter .265 in. MECHANICAL CHARACTERISTICS: Operating Temperature Range -40°C To +75°C Installation Temperature Range -25°C To +75°C Bulk Cable Weight 30 lbs/1000 ft. Max.
7919A Paired - Category 5e DataTuff® Twisted Pair Cable Maximum Delay Skew (ns/100m) 45 ns/100 m Maximum Conductor DC Resistance @ 20 Deg. C 9.38 Ohms/100 m Maximum DCR Unbalance @ 20 Deg. C 3% Max. Operating Voltage - UL 300 V RMS ELECTRICAL CHARACTERISTICS - PREMISE: Premise Cable Electricals Table 1 : Frequency (MHz) Max. Attenuation (dB/100 m) Min. NEXT (dB) Min. PSNEXT Min. ACR (dB) Min. PSACR (dB) (dB) Min. Return Loss (dB) 1 4 8 10 16 20 25 31.25 62.5 100 2.0 4.1 5.8 6.5 8.2 9.3 10.
7919A Paired - Category 5e DataTuff® Twisted Pair Cable C = CRATE REEL PUT-UP. Revision Number: 6 Revision Date: 07-12-2006 © Copyright 2006 Belden, Inc All Rights Reserved. Although Belden ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability.
PANARAY® 402® Series II Loudspeaker General Description The Bose® 402 Series II loudspeaker is a 120-watt speaker designed for permanent installations and portable use indoors and outdoors. As a new addition to the Bose line of Installed AnyWhere loudspeakers, it meets our strict standards for outdoor use.
response across the operating range of the 402® Series II loudspeaker. Using a controller or EQ card also allows for crossover of the 402 Series II loudspeaker with a Bose® bass loudspeaker. System Configurations Mixer/Preamp CH1 CH2 Bose® power amplifier CH1 Loudspeaker Configuration The 402 Series II loudspeaker can be used with the Bose 1600 and 1800 amplifiers. It is also compatible with industry standard amplifiers rated for 4-8Ω loads. The 402 speaker is packaged one per carton.
The loudspeaker system shall be used with a PANARAY® system digital controller, to be connected before the input(s) of the system power amplifier(s), or with a 402® loudspeaker EQ card, to be installed in a Bose® 1600 or 1800 amplifier.
©2003 Bose Corporation, The Mountain Framingham, MA 01701-9168 Subject to change without notice. PN269262 AM Rev.
Panaray® MA12EX Modular Line Array Loudspeaker TECHNICAL DATA SHEET Key Features • Designed to deliver full-range music and high speech intelligibility in both indoor and outdoor acoustically demanding spaces • Full-range music performance from 75 Hz to 13 kHz (-3 dB) without the need for additional bass augmentation • Articulated Array® loudspeaker technology delivers wide horizontal dispersion for broad 160° coverage* • Available in black or white, paintable Description The Panaray® MA12EX modular line
Panaray MA12EX ® Modular Line Array Loudspeaker TECHNICAL DATA SHEET Recommended Equalization PEQ2 PEQ3 PEQ4 PEQ5 PEQ6 MA12EX Stacked Wall PEQ1 MA12EX Stacked Free Freq. (Hz) Slope (dB/octave) Type Type Freq. (Hz) Bandwidth Level (dB) Type Freq. (Hz) Bandwidth Level (dB) Type Freq. (Hz) Bandwidth Level (dB) Type Freq. (Hz) Bandwidth Level (dB) Type Freq. (Hz) Bandwidth Level (dB) Type Freq. (Hz) Bandwidth Level (dB) HPF MA12EX Wall Application MA12EX Free Air MA12EX Processor Settings 63.
Panaray MA12EX ® Modular Line Array Loudspeaker 125 Hz Octave Band 250 Hz Octave Band 90 120 60 120 150 30 -30 -24 -18 -12 -6 0 30 -30 -24 -18 -12 -6 0 210 330 -30 -24 -18 -12 -6 210 300 330 240 300 270 200 Hz 400 Hz 125 Hz 250 Hz 500 Hz 160 Hz 315 Hz 630 Hz 2000 Hz Octave Band 4000 Hz Octave Band 90 120 60 120 150 30 -30 -24 -18 -12 -6 0 120 30 -30 -24 -18 -12 -6 0 210 90 60 150 6 180 330 0 300 330 240 30 -30 -24 -18 -12 -6 0 210 60 150 6 180 270
Panaray MA12EX ® Modular Line Array Loudspeaker 125 Hz Octave Band 250 Hz Octave Band 90 120 60 120 150 30 -30 -24 -18 -12 -6 0 30 -30 -24 -18 -12 -6 0 210 330 240 300 270 400 Hz 500 Hz 160 Hz 315 Hz 630 Hz 2000 Hz Octave Band 4000 Hz Octave Band 90 120 30 -30 -24 -18 -12 -6 0 120 30 -30 -24 -18 -12 -6 0 210 90 60 150 6 180 330 0 300 330 240 30 -30 -24 -18 -12 -6 0 210 60 150 6 180 270 300 180 210 300 270 1600 Hz 3150 Hz 1000 Hz 2000 Hz 4000 Hz 1250 Hz
Panaray MA12EX ® Modular Line Array Loudspeaker TECHNICAL DATA SHEET Beamwidth Beamwidth Angle (degrees) 360 100 10 Horizontal Vertical 20 100 1000 10000 20000 Frequency (Hz) Directivity and Q Directivity Index Index and Q 30 1000 Directivity Index (dB) 25 20 100 Q 15 10 10 5 0 1 20 100 1000 10000 20000 Frequency (Hz) 1 Average Frequency Response Average Frequency Response and Impedance and Impedance 30 100 Level (dB−SPL) 10 0 10 −10 −20 Impedance (Ohms) 20 Average Frequ
Panaray MA12EX ® Modular Line Array Loudspeaker The loudspeaker shall be a multiple driver, full-range system with matched active equalization as follows: The transducer complement shall consist of twelve 2.25" (57mm) high-excursion, weatherresistant drivers mounted in an Articulated Array® loudspeaker design. Each driver shall have a rated impedance of 5g and wired in series/parallel, resulting in a composite nominal impedance of 8g.
Panaray MA12EX ® Modular Line Array Loudspeaker TECHNICAL DATA SHEET Product Codes Loudspeaker MA12EX Loudspeaker Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC 317302-0100 MA12EX Loudspeaker White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC 317302-0200 Accessories CB-MA12EX Coupling Bracket Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 OF 8 pro.Bose.com All information subject to change without notice. ©2009 Bose Corporation. Bose, Panaray, Articulated Array, Modeler and ControlSpace are registered trademarks of Bose Corporation in the U.S. and other countries. Other marks are the property of their owners.
PANARAY® System TECHNICAL DATA SHEET Digital Controller II Product Overview The Bose® Panaray® system digital controller is a universal EQ controller engineered to provide Bose professional loudspeakers with active equalization. The EQs for Bose professional loudspeakers can be accessed by selecting the appropriate preset and configuration. No programming is required.
PANARAY® System TECHNICAL DATA SHEET Digital Controller II Product Specifications Inputs: 2 analog, balanced, differential, XLR Input impedance: Differential 2.
PANARAY® System TECHNICAL DATA SHEET Digital Controller II Configuration diagrams: Stereo mid/high with mono bass Mono mid/high with mono bass 2X endfire bass array 3 OF 4 pro.bose.
PANARAY® System TECHNICAL DATA SHEET Digital Controller II Engineers’ and Architects’ Specifications The controller shall use a digital signal processing architecture running at a 44.1 kHz sample rate. The frequency response shall be from 20 Hz to 20 kHz (+0/-1 dB). The dynamic range shall be 103 dB (typical) 20 Hz to 20 kHz. The controller shall include a single analog, balanced, differential XLR input connector for each of the two input channels.
LR-400 Portable Display FM Receiver &RQÀJXUDWLRQ LR-400-072 LR-400-216 LR-400-863 The LR-400 Portable Display FM Receiver is a lower cost digital display receiver. It has exceptional audio quality as Listen’s full-featured receivers and the same convenient recharging options. The LR-400 can receive up to 17 wide band channels along with 40 narrow bands (72 MHz), 19 wide band with 38 narrow band (216 MHz) and 17 wide band (863 MHz) channels.
1 2 3 4 12 10 5 9 11 6 8 7 9 Product Features LR-400-072/216 1. An earphone jack (3.5 mm) accepts either mono or stereo headsets. Receiver antenna is built into the earphone cord, eliminating additional wires while maximizing receiver effectiveness. 2. Multifunction LED indicates power on, if batteries are low, if the unit is locked on a channel when SEEK is pressed and charging status. 3. Easy on/off volume control. 4.
1 2 3 4 11 9 5 8 7 10 6 8 Product Features LR-400-863 1. An earphone jack (3.5 mm) accepts either mono or stereo headsets. Receiver antenna is built into the earphone cord, eliminating additional wires while maximizing receiver effectiveness. 2. Multifunction LED indicates power on, if batteries are low, if the unit is locked on a channel when SEEK is pressed and charging status. 3. Easy on/off volume control. 4. Look&Listen™ LCD Display shows channel selection, channel lock and battery level.
Accessories Headphones LA-170 LA-161 Single Ear Bud LA-162 Stereo Ear Bud LA-164 Ear Speaker LA-165 Stereo Headphones LA-166 Neck Loop LA-170 Behind-the-Head Stereo Headphones 3RZHU &KDUJLQJ 6XSSOLHV LA-202 Power/Charging Supply for FM Portable Products LA-208-01 7.5 VDC Power/Charging Supply for FM Portable Products (North America) LA-208-02 7.5 VDC Power/Charging Supply for FM Portable Products (Asia, UK) LA-208-03 7.
LR-400-072 6SHFLÀFDWLRQV RF Frequency Range 72.025 - 75.950 MHz 216.0125 - 216.9875 MHz Number of Channels 17 wide band, 40 narrow band 19 wide band, 38 narrow band Sensitivity RF LR-400-216 .
LR-400-863 6SHFLÀFDWLRQV RF RF Frequency Range 863.050 - 864.950 MHz Number of Channels 17 Wideband Sensitivity .
Frequently Asked Questions Q What is the difference between the LR-400 and the LR-500? LR-500 gives the user an opportunity to lockout unused channels and has the controls on the outside A The of the front door. Q Can the LR-400 be used with multiple transmitters? The LR-400 can be used with multiple transmitters, but unlike the LR-500, it cannot be programmed to A Yes. lock out channels.
LT-800 Stationary Transmitter &RQÀJXUDWLRQ Stationary FM Transmitter (72 MHz) Stationary FM Transmitter (216 MHz) Stationary FM Transmitter (863 MHz) Thanks to its outstanding audio quality, the Listen LT-800 Stationary Transmitter can be used in a variety of applications. The LT-800 is connected to your main audio system, broadcasting a high quality audio signal to belt pack receivers, stationary receivers, or wireless speaker / receivers.
3 2 1 10 11 12 4 5 6 7 8 9 13 14 15 16 /7 0+] 3URGXFW )HDWXUHV 1. POWER on/off on front of unit for easy access. 2. Multiple audio inputs, with input level control and dual VU meters. 3. Mix Level control sets level of mixed audio. VU meter shows the output level of your mixed audio. 4. Contour equalization cuts/boosts frequencies above 5 kHz. 5. Processing (automatic gain control and compression) can be turned on and off from the front panel. 6.
3 2 1 9 10 11 4 5 6 7 8 12 13 14 15 /7 0+] 3URGXFW )HDWXUHV 1. POWER on/off on front of unit for easy access. 2. Multiple audio inputs, with input level control and dual VU meters. 3. Mix Level control sets level of mixed audio. VU meter shows the output level of your mixed audio. 4. Contour equalization cuts/boosts frequencies above 5 kHz. 5. Processing (automatic gain control and compression) can be turned on and off from the front panel. 6.
v $FFHVVRULHV $QWHQQDV LA-124 LA-101 Helical Top Mounted Antenna (72MHz) LA-102 Telescoping Top Mounted Antenna (216MHz) LA-106 Telescoping Top Mounted Antenna (72 MHz) LA-107 Ground Plane Remote Antenna (216 MHz) LA-116 Coaxial Dipole Remote Antenna (72MHz) LA-117 Coaxial Dipole Remote Antenna (216 MHz) LA-122 Universal Antenna Kit (72 and 216 MHz) LA-123 90Ý Helical Antenna (72 MHz) LA-124 90Ý Helical Antenna (216 MHz) LA-125 Antenna Kit for Rack Mount (72 MHz) LA-126 Antenna Kit for Rack Mount (216 MH
RF 6SHFLÀFDWLRQV RF Frequency Range Number of Channels Frequency Accuracy Transmitter Stability Output Power Antenna Antenna Connector Compliance System Frequency Response System Signal to Noise Ratio (AWeighted) System Distortion Audio Input 1 Audio Audio Input 2 Audio Processing (Process) Contour Combined Audio Output (Mix) Headphone Output (monitor) Front Panel Controls Rear Panel Internal Adjustments Programming Input 1, Input 2, Mix Level VU Indicators Power Physical SQ and Processing RF Powe
RF Specifications RF Frequency Range Number of Channels Frequency Accuracy Transmitter Stability Transmission Range Output Power Antenna Antenna Connector Compliance System Frequency Response System Signal to Noise Ratio System Distortion Audio Input 1 Audio Audio Input 2 Audio Processing (Process) Contour Combined Audio Output (Mix) Headphone Output (Monitor) Front Panel Controls Rear Panel Internal Adjustments Programming Indicators Input 1, Input 2, Mix Level VU Processing RF Power LCD Display Tes
)UHTXHQWO\ $VNHG 4XHVWLRQV Q Does the LT-800 include the rack mount? A No, but an LA-326 Universal Rack Mounting Kit is available for purchase. Q Do I need a transmitter for each audio source? A Yes. Q What is the range of the LT-800 transmitter? Line of site up to 1500 ft. (457 m) for 72 MHz. A Line of site up to 3,000 ft. (914 m) for 216 MHz. Q Line of site up to 400 ft. (122 m) 863 MHz. Is there a limit to the number of transmitters I can use in one room? Yes.
Studiophile™ BX5a Deluxe English User Guide
Studiophile BX5a Deluxe Introduction Thank you for choosing the Studiophile Series BX5a Deluxe bi-amplified studio near-field monitor speakers. M-Audio is well known for digital audio interface technology, digital converters, audio preamps and mixers. Now, after extensive research and development, M-Audio is proud to present the Studiophile BX5a Deluxe. The BX5a Deluxe was designed and tested by veteran audio engineers to meet your needs in a studio monitoring environment.
4. Enclosure Like the other components, the BX5a’s enclosure has an important role in shaping the overall sonic response. In order to provide more stable performance, the BX5a’s enclosure employs a special high acoustic efficiency MDF and unique interior reinforcement designed to absorb vibration and impact generated under extreme conditions. The custom design on the front panel will aid in diffraction and will benefit stereo imaging. 5.
Unbalanced 1/4” wiring can be done with either a two- or three-conductor (TS or TRS) plug. A two‑conductor (TS) plug automatically grounds the signal negative input, whereas a three‑conductor (TRS) plug, wired unbalanced, provides the option of leaving the negative input open or grounded. We recommend that you ground the unused negative input (this can be done by wiring the ring and sleeve of the TRS plug together).
Installation For optimal performance of the BX5a Deluxe, please read the following thoroughly and carefully prior to installation. Precautions Handling: Please do not touch the speaker cones. The BX5a set is packaged in the box tightly, so your attention is required when taking the monitors out of the box. To avoid possible damage to the speaker units, hold both sides of the monitor in order to pull it out of the box.
Studiophile BX5a Deluxe English Connecting to Preamp or Computer Outputs Before connecting, make sure the output device’s power has been turned off. Plug the XLR balanced, TRS balanced or TS unbalanced cable to the corresponding output connectors of a pre‑amplifier, computer or game console. Placing the BX5a Deluxe Placing the speakers is one of the most important procedures in order to monitor sound accurately.
Appendix A - Technical Specifications Type: 2-way near-field studio reference monitors LF Driver: 5-inch Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded.
M-Audio USA M-Audio Germany Technical Support Technical Support 5795 Martin Rd., Irwindale, CA 91706 Kuhallmand 34, D-74613 Ohringen, Germany web. . . . . . . . . . . . . . . www.m-audio.com/tech email . . . . . . . . . . . . . . . support@m-audio.de tel (pro products) . . . . . . . . . . . (626) 633-9055 tel. . . . . . . . . . . . . . . +49 (0)7941 - 9870030 tel (consumer products). . . . . . . (626) 633-9066 fax (shipping). . . . .
CX 2-channel Professional Power Amplifiers CX302 | CX502 | CX702 | CX902 | CX1102 | CX302V | CX602V | CX1202V All models include an integrated security cover for tamper-proof installations The CX Series is designed to meet the Features specialized needs of sound contractors.
CX 2-Channel Specifications CX302 CX502 Stereo Mode (both channels driven) CX702 CX902 CX1102 CX302V CX602V CX1202V Continuous average output power per channel 8Ω / 20 Hz – 20 kHz / 0.05% THD 200 W 300 W 425 W 550 W 700 W – 550 W 700 W 4Ω / 20 Hz – 20 kHz / 0.05% THD 325 W 500 W 700 W 900 W 1100 W – – 1100 W 2Ω / 1 kHZ / 1% THD 600 W 800 W 1200 W 1500 W 1700 W – – - 70V / 20 Hz – 20 kHz / 0.05% THD − — — 400 W 800 W 200 W 400 W 800 W 70V / 1 kHz / 0.
CX 4-channel Professional Power Amplifiers CX254 | CX404 | CX204V All models include an integrated security cover for tamper-proof installations The 4-channel CX amplifiers give you four Features channels in only two rack spaces, without • Three models that range in power from 170 watts to 450 watts per channel compromising on power.
CX 4-Channel Stereo Mode (all channels driven) 8Ω / 20 Hz – 20 kHz / 0.05% THD 4Ω / 20 Hz – 20 kHz / 0.05% THD 2Ω / 1 kHZ / 1% THD 70V / 20 Hz – 20 kHz / 0.05% THD 70V / 1 kHz / 0.05% THD 70V / 1 kHz / 1% THD Bridge-Mono Mode 16Ω / 20 Hz – 20 kHz / 0.1% THD 8Ω / 20 Hz – 20 kHz / 0.1% THD 4Ω / 1 kHz / 1% THD 140V / 20 Hz – 20 kHz / 0.1% THD 140V / 1 kHz / 0.
Model SM58 Dynamic Microphone Specification Sheet MODEL SM58 UNIDIRECTIONAL DYNAMIC MICROPHONE OVERVIEW The Shure SM58 is a unidirectional (cardioid) dynamic vocal microphone designed for professonal vocal use in sound reinforcement and studio recording. A highly effective, built-in, spherical filter minimizes wind and breath “pop” noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise.
SM58 MICROPHONE Specification Sheet Overall Dimensions Internal Connections 162 mm (6 3/8in.) CARTRIDGE SWITCH (SM58S ONLY) GREEN CODED TERMINAL GREEN BLUE 2 1 YELLOW YELLOW RED 23 mm (29/32in.) 51 mm (2 in.
SHURE MODEL UA830 UHF IN-LINE RF AMPLIFIER SHURE MODÈLE UA830 UHFAMPLIFICATEUR D'ANTENNE EN LIGNE RF SHURE MODELL UA830 UHF IM ZEILE HF-ANTENNENVERSTÄRKER MODELO UA830 DE SHURE AMPLIFICADOR DE ANTENAS EN LINEA RF MODELLO UA830 SHURE UHF IN AMPLIFICATORE AD ANTENNA IN LINEA RF Printed in U.S.A. ©2008 Shure Incorporated 27D8643 (Rev. 9) Printed in U.S.A.
GENERAL The Shure UA830 is a low-noise, in-line antenna amplifier. The UA830 is intended for remote-mounting antennas to a Shure Model UR4 or ULX receiver or Model UA845, or UA844 distribution amplifier in a large installation, effectively shortening the distance from the transmitters. The unit receives power through its output port from the Shure receiver or distribution amplifier.
INSTALLATION 1. Thread the Shure Model UA830 unit on the supplied stand (Figure 2), or on a 5/8 in.-27 thread microphone stand. 2. Connect the antenna to the TO ANTENNA port on the Model UA830 unit (Figure 2). 3. Using 50 W low-loss coaxial cable (purchased separately, Shure UA825 or UA850 or UA8100 recommended), connect the TO RECEIVER port of the UA830 to the Shure Model UR4 or ULX wireless receiver or UA845, or UA844 Antenna Distribution System (see Figure 3 for UR4 Receiver example). 4.
ADJUSTING FOR DIFFERENT CABLE LENGTHS +3 dB +10 dB ADJUSTING FOR DIFFERENT CABLE LENGTHS FIGURE 4 The longer the coaxial cable connecting the UA830 unit and the receiver or distribution amplifier, the greater the possibility for signal loss. The UA830 comes with a GAIN switch that can compensate for signal loss in longer cables. Shure recommends using the Shure UA825 or UA850 or UA8100 coaxial cable when remote mounting antennas. NOTE: Use only 50Ω low-loss cables (RG-8 or equivalent).
SPECIFICATIONS RF Frequency Range UA830A . . . UA830KK . . UA830C . . . UA830D . . . UA830UB . . UA830WB . . UA830USTV UA830X. . . . ... ... ... ... ... ... ... ... .... .... .... .... .... .... .... .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .... .... .... .... .... .... .... .... ... ... ... ... ... ... ... ... .... .... .... .... .... .... .... .... ... ... ... ... ... ... ... ... .... .... .... .... .... .... .... ....
SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A. Phone: 847-600-2000 U.S. Fax: 847-600-1212 Intl Fax: 847-600-6446 Europe, Middle East, Africa: Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific: Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055 SHURE Incorporated http://www.shure.com États-Unis, Canada, Amérique latine, Caraïbes : 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
MODEL UA870 UHF ACTIVE DIRECTIONAL ANTENNA FIGURE 1 ABBILDUNG 1 FIGURA 1 NOTE: For additional technical assistance, call the Shure Customer Service Department for your region. SPECIFICATIONS MODEL UA870 UHF ACTIVE DIRECTIONAL ANTENNA RF Frequency Range The Shure UA870 is an active UHF wireless directional antenna. It featUR4es a log periodic dipole array.
Connector ..........................................................................................Female, BNC-type Dimensions UA870 (A, KK, MB, MC, UB, X):.......................8.90 in. (226 mm) H x 9.21 in. IMPORTANT: Toujours effectuer un essai de déplacement avant d’utiliser un système sans fil pour un discours ou une représentation. Essayer différents placements d’antenne pour déterminer la position optimale de la UA870. REMARQUE: ..............................................................
HOMOLOGATION TECHNISCHE DATEN L’antenne UHF directionnelle active modèle Shure UA870 est conforme aux exigences essentielles de la directive européenne R&TTE 99/5/CE et est autorisée à porter la marque CE. Conforme EMC selon la norme EN 301 489 Parties 1 et 9. HF-Frequenzbereich IMPORTANT ! CE MATÉRIEL RADIO EST PRÉVU POUR UTILISATION EN SPECTACLES PROFESSIONNELS ET APPLICATIONS SIMILAIRES.
ANTENNA UHF DIRETTIVA, ATTIVA, MODELLO UA870 Guadagno di antenna Il modello Shure UA870 è un’antenna UHF direttiva. Impiega una schiera di dipoli periodici con allineamento logaritmico. Rispetto ad un’antenna a mezz’onda omnidirezionale, il diagramma polare a cardioide del modello UA870 presenta una ricezione superiore nell’angolo di ricezione desiderato ed una reiezione maggiore dei segnali a radiofrequenza fuori dell’angolo di ricezione. .................................................................
INSTRUCCIONES DE INSTALACION Dimensiones 1. Determine el largo del cable necesario para conectar la antena UA870 al receptor UR4 ó ULX o al sistema de distribución de antenas UA845 ó UA844. UA870 (A, KK, MB, MC, UB, X): ........................ 226 mm alt. x 234 mm ancho IMPORTANTE: Siempre utilice cable de 50 ohmios y de poca pérdida, como el RG-8X o su equivalente. Se recomienda usar el cable UA825 de 7,6 m (25 pies) o el UA850 de 15,2 m (50 pies), o el UA8100 de 30,4 m (100 pies) de Shure.
6 MODEL UA870 UHF ACTIVE DIRECTIONAL ANTENNA 27C8629 (Rev.
7 MODEL UA870 UHF ACTIVE DIRECTIONAL ANTENNA 27C8629 (Rev.
www.shure.com United States: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Europe, Middle East, Africa: Shure Europe GmbH Wannenäckestr. 28, 74078 Heilbronn, Germany Phone: 847-600-2000 Fax: 847-600-1212 Email: info@shure.com Phone: 49-7131-72140 Fax: 49-7131-721414 Email: info@shure.de ©2008 Shure Incorporated Asia, Pacific: Shure Asia Limited Unit 301, 3rd Floor Citicorp Centre 18, Whitfield Road Causeway Bay, Hong Kong Phone: 852-2893-4290 Fax: 852-2893-4055 Email: info@shure.
Wireless Microphones ULX WIRELESS MICROPHONE SYSTEMS SPECIFICATION SHEET ULX STANDARD ULXP4 DIVERSITY RECEIVER ULX Standard UHF systems represent a breakthrough in performance and price for both working musicians and professional sound installers. Multiple system configurations provide limitless options, each with a choice of legendary Shure microphone transmitters.
SPECIFICATIONS RF Sensitivity 1.26 μV for 12 dB SINAD (typical) RF Carrier Frequency Range 470.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is used). Refer to the frequency supplement supplied with the system. Effective Range Image Rejection 80 dB typical Spurious Rejection 75 dB typical Ultimate Quieting (reference ±38 kHz deviation) >105 dB, A-weighted 100 m (300 ft.
ULX1 Transmitter Input Connector Microphone (pins 3 and 4 tied together) Guitar (with WA302) TA4M TA4M Configuration Unbalanced, active Unbalanced, active Actual Impedance 75 kΩ 1 MΩ Maximum Input Level -4 dBV (1.82 Vp-p) Gain Switch 0 dB: 5 dBV (5 Vp-p) ULX2 Transmitter Input Configuration Unbalanced, active Actual Impedance 20 kΩ Maximum Input Level (1 kHz, 1% THD) 12 dBV (10 Vp‑p) Gain Switch -20 dB: 25 dBV (50 Vp‑p) Pin Assignments 1 = Ground 2 = +5V through 4.
www.shure.com United States: Shure Incorporated 5800 West Touhy Avenue Niles, IL 60714-4608 USA Europe, Middle East, Africa: Shure Europe GmbH Wannenäckestr. 28, 74078 Heilbronn, Germany Phone: 847-600-2000 Fax: 847-600-1212 Email: info@shure.com Phone: 49-7131-72140 Fax: 49-7131-721414 Email: info@shure.
CC-222SL Technical Documentation PRODUCT OVERVIEW TASCAM’s most popular combination CD/Cassette recorder, the CC222SL, now supports a more robust slot loading CD transport and comes equipped with “selectable” independent outputs for CD and Cassette. The CC222SL includes a RIAA phono input which allows direct recording from a turntable; a feature which sets the CC-222SL above all the rest.
PANELS TASCAM 7733 Telegraph Road Montebello, CA 90640 (323) 726-0303 http://www.tascamcontractor.com All features, pricing, and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
SPECIFICATIONS CD recorder section Recordable discs Quantization bit depth Sampling frequency Frequency response S/N ratio Dynamic range Total harmonic distortion Channel separation Wow and flutter Digital input Digital input Digital output Line inputs 1 Input impedance Line outputs 1 Level Maximum output level Output impedance CD-R, CD-R-DA, CD-RW, CD-RW-DA (High speed CD-RW is supported) 16 bit linear 44.1 kHz 20 Hz~20 KHz ±0.8 dB (playback) ±1.
whirlwind 99 Ling Rd Rochester NY 14612-1965 800 733-9473 Fax: 877 275-0400 http://www.whirlwindusa.com PB SERIES PASSIVE PRESS BOXES Owner’s Manual The PB Series expands mic outputs when used with line outs on PRESSPOWER2 or PRESSMITE active press boxes or any time a line level feed is available. These passive units distribute one line level input to multiple mic level outputs.
Beickert Audio 219 Arnold Ave, Syracuse, New York, 13210 David Beickert - Direct Cell: 315-952-5019 - email: dabeickert@hotmail.com Ron Haines - Direct Cell: 315-558-9677 - email: area52ron@gmail.
