Brochure
1675 MacArthur Boulevard • Costa Mesa, CA 92626 • Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
please recycle
© 2016 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other
countries. All other trademarks are the property of their respective owners. Patents may apply or be pending.
AD-C4T-LP Spec Sheet 06/24/2016
AD-C4T-LP Details
1 0 0 1 k 1 0 k
1 0 0
9 0
8 0
7 0
6 0
5 0
1 5 0
1 2 0
9 0
6 0
3 0
0
Frequenc y (Hz)
Sound pressure, Level (dB)
Resistance, Amplitude (ohm)
2 0 5 0 2 0 0 5 0 0 2 k 5 k 2 0 k
9 5
8 5
6 5
5 5
1 3 5
1 0 5
4 5
1 5
Frequency Response (Raw)
Frequency Response (Intrinsic Correction™)
Impedance (16 ohm bypass)
1 k 1 0 k
1 0 0
Fre quenc y (H z)
Beamwidth (-6dB) (deg)
2 0 0 5 0 0 2 k 5 k 2 0 k
2 0 0
7 0
5 0
3 0
2 0
Impedance / Frequency Response:
Beamwidth:
Dimensions:
As part of QSC’s ongoing commitment to product development,
specifications are subject to change without notice.
Specications
System Details AD-C4T-LP
Effective frequency range
1
70 Hz – 20 kHz
Rated noise power / voltage
2
30 watts / 22 volts (rms)
Sensitivity [dB]
3
Sensitivity at 4m, 100V maximum tap
87
TBD
Rated coverage (‐6 dB)
4
150° conical DMT
One-third octave frequency band
contribution at full power using 100V
maximum tap [Hz / dB]
500 / TBD; 630 / TBD; 800 / TBD
1000 / TBD; 1250 / TBD; 1600 / TBD
2000 / TBD; 2500 / TBD; 3150 / TBD; 4000 / TBD
Directivity factor
4
4.5
Directivity index [dB]
4
6.5
Maximum continuous SPL [dB]
5
102
Maximum peak SPL [dB]
5
108
Nominal impedance [ohms] 16
Recommended amplier 60 watts
Transformer taps / impedance 16Ω (in bypass setting)
3.75W (70V); 7.5W (100V) Tap: 1333Ω
7.5W (70V); 15W (100V) Tap: 667Ω
15W (70V); 30W (100V) Tap: 333Ω
30W (70V); N/A (100V) Tap: 167Ω
LF transducer 114 mm [4.5 in] weather treated paper cone woofer
HF transducer 19 mm [.75 in] aluminum dome tweeter
Input connector type Euroblock connector with parallel output
Enclosure material ABS bafe on powder coated steel back can
Grille material Powder coated steel
Ingress protection IP-34
Operating environment Designed for indoor use
Operating temperature range -20 to 50° C [-4 to 122° F]
Cutout dimension Ø 245 mm [Ø 9.65 in]
Net weight 3 kg [6.6 lb]
Product dimensions (Diameter x Height) Ø 280 x 100 mm [Ø 11.02 x 3.93 in.]
Shipping weight 10.2 kg [22.5 lb] (pair packed)
Shipping dimensions (H x W x D) 183 x 699 x 394mm [7.2 x 27.5 x 15.5 in](pair packed)
Included accessories C-ring and tile rails, rail screws, euroblock connector,
cut-out template, tether grille
Optional accessories AD-MR6 (pre-install mud ring)
AD-CC6 (pre-install conduit cover)
Safety Agency EN54-24: 2008 type A (No. pending)
UL1480, UL2043, NFPA90, NFPA70 suitable for use
in air handling spaces. Transformer UL registered per
UL1876, ROHS, C-Tick (pending), CE compliant. Bafe
meets UL94-V0 and UL94-5VB amibility rating; in
accordance with IEC60849 / EN60849 systems.
[9.44 in]
240 mm
[11.02 in]
280 mm
[3.74 in]
95 mm
[3.93 in]
100 mm
2
-10dB from rated sensitivity
1
IEC noise, 2hrs
4
500 Hz–5 kHz average
3
Transfomer bypassed, 1W, 1m, IEC bafe,
200‐10kHz average, on‐axis
5
Calculated from rated noise voltage and sensitivity