DDI-3 DataPort Accessory Card I N S TA L L AT I O N G U I D E ▼ DDI-3 *TD-000118-00* *TD-000118-00* Rev.
Instructions for the DDI-3 DataPort Accessory Card I. INTRODUCTION STBY VMN1 The DDI-3 DataPort Accessory Card converts a QSC amplifier’s DataPort to an eight-position terminal block, providing convenient access to the pins of the amplifier’s DataPort; this is useful for connecting input signals or implementing a remote on/off (standby) system without using a DataPort cable. Four solder pads provide access to the amplifier’s output voltage and current monitors.
III. WARRANTY AND DISCLAIMERS QSC Audio Products, Inc. is not liable for any damage to speakers, amplifiers, or any other equipment that is caused by negligence or improper installation and/or use of the DDI-3 DataPort Accessory Card. PRODUCT WARRANTY QSC Audio Products, Inc.
QSC Audio Products, Inc., 1675 MacArthur Boulevard Costa Mesa, California 92626 USA PH: (714) 754-6175 FAX: (714) 754-6174 QSControl2 is a trademark of QSC Audio Products, Inc. “QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office.
