User guide

Troubleshoong
60
Testing the system from the PLx box.
When the first light is yellow and the second is green, the system is in standby mode.
The PMII processor is ready but the power to the key solenoids is off.
Press the PLx button once to turn the first light green, which turns on the power to the key solenoids.
Pressing the button now will play the piano.
Pressing the button again will stop play.
If the first two or more lights are yellow, the system has shut down.
Unplug the AC power cord from the wall outlet...
Wait two minutes and then reconnect.
No Music
Shutdown / Unplug from AC wall outlet / Reinsert SD card / Reconnect to power.
PMII Light Patterns and Button Functions
2 Blinks / sec
Idle
Blink
Blinks with MIDI data. Piano should be playing.
2
Solid
Idle
1 Wink / sec
Indexing Music
Rapid Blinking
Updating Driver
3
1 Blink / sec
Network Mode = Network with Connection
Solid
Network Mode = Stand Alone with Connection
Off
Network Mode = No Connection
Hold down for just 4 seconds to change Network Mode.
Stand Alone
Network
OFF
Hold down for 8 seconds to power OFF PMII.
- Tap again to reboot.
1