User guide

Introducon
6
Make Certain that the Kit will Fit!

All kits play 80 notes, excluding the first and last 4 keys of the standard piano keyboard.The following quesons
shouldbeaskedbeforebeginninganinstallaon:

1.Isitagrandoruprightpiano?Thekitwillnotfitintoaspinetpiano.

2.Isthe
keybedmadeofwoodorawood‐veneeredlaminate?

3.Doesthepianohavearangeof88notes,extendingfromlowAtohighC?

4.Isthekeyframemadeofwood?

5.Isthepianowell‐regulatedandingoodmechanicalcondion?.

6.Doesthepiano
havesufficientspacebeneaththesoundboard or inside anuprighttomountthepedalsolenoid&
powersupply(5.25"x5.25"x12.5")?

7. Canthebackofthekeyframebecutaway13/16"?
Tools Needed
Paper WoodChisel
Pencil Awl
MeasuringTape WoodGlue
LongStraightedge SprayPaint(Black)
AdjustableFrameSquare Sandpaper(Assortment)
Screwdriver(Assortment) PalmSander(Oponal)
PowerScrewdriver(Oponal) JigSaw
Socket(Assortment) JigSawBlades(Assortment)
11/32”NutDriver PowerDrill(RightAngleOponal)
5/16”NutDriver DrillBits
(Assortment)
Hammer 1‐3/4”ForstnerBitorFlat(paddle)Bit
Hacksaw CenterPunch
MetalFile CircularSaw‐71/2”blade(Oponal)
Rasp Router(Oponal)
UlityKnife VacuumCleaner
PlascCungBoard 