User guide

52
Wi‐Fi Setup
How to Configure the TP-Link: “Network” to “Stand Alone” Mode [iPad & Safari Example]
Set a Static IP Address on your iTouch, iPhone or iPad
Select Settings and then Wi-Fi, Turn ON if necessary
Select and connect to QRSP-O Network
Select the Blue Circle to the right of QRSPNO Network
Select Static
Enter the following:
IP address = 192.168.0.5
Subnet mask = 255.255.255.0
Router = 192.168.0.254
DNS = 192.168.0.254
HTTP Proxy should be OFF
Go back to your home screen…
Select the Safari browser
Enter the following address:
192.168.0.254 and press “Go”
Enter “admin” as the User Name and Password
Press the “Log In” button
Click Quick Setup
Click Next
Select Router Mode
Click Next
Change the SSID to QRSPNO Stand Alone
Set Channel to Auto
Under Security Options: Select Disable Security
Click Next
Under WAN Connection Type select Static IP
Click “Next”
Enter the following:
WAN Connection Type = Static IP
IP address = 192.168.1.5
Subnet mask = 255.255.255.0
Default Gateway = 192.168.1.1
Primary DNS = 192.168.1.1
Secondary DNS = 192.168.0.254
Click Next or Save
Click Reboot
Click OK
Restart - Wait for the TP-Link to finish and restart
Close browser when 100% complete
On the QRS PNOmation II remote control:
Press the following buttons in sequence…
SHIFT FUNC 9 9 0
The third light should be green
Press SHIFT INFO to confirm the 192.168.1.1 address
The device is now ready for “Stand-Alone Mode” on the PMII.
Select Settings and then Wi-Fi on your iPad, iPhone or iTouch.
Select and Connect to QRSPNO Stand Alone
Open Safari and enter 192.168.1.1