User guide

Wi‐Fi Setup
51
How to Configure the TP-Link: “Stand Alone” to “Network” Mode [iPad & Safari Example]
Change PMI to Network Mode
or
From an iPod/Touch, iPhone or iPad Go to...
System Setup/ Other Settings / Network Settings
Turn OFF DHCP Server Enable (Standalone)
Turn ON Static IP(off) or DHCP Client(on)
Press the Apply Changes Button
Press Yes to confirm
Press Yes again.
From a QRS Remote Control
Press the following buttons in sequence…
SHIFT FUNC 9 9 1
Third light flashes red/green and then solid yellow
You will be Disconnected form PMII
Set a Static IP Address on your iTouch, iPhone or iPad
Select Settings and then Wi-Fi, Turn ON if necessary
Select and Connect to QRSPNO Stand Alone
Select the Blue Circle to the right of QRSPNO Network
Select Static
Enter the following:
IP address = 192.168.0.5
Subnet mask = 255.255.255.0
Router = 192.168.0.254
DNS = 192.168.0.254
HTTP Proxy should be OFF
Go back to your home screen…
Enter admin as the User Name and Password
Press Log In
Press Quick Setup
Press Next
Press Bridge Mode
Press Next
Press the Survey button
Click Connect next to the network that you wish to join
Change the SSID to QRSPNO Network
Set Channel to Auto
Select the Security Option type of your home network
Enter your Network Password
Click Next
You may be asked to change the channel
Note Channel #
Press OK and Change the Channel
Press OK and then click Next
Select Disable Security
Click Next
Click Reboot
Click OK to confirm
Select the Safari browser
Enter the following address:
192.168.0.254 and press “Go”
The TP-Link is now linked to your home network and ready for “Network Mode” on the PMII.
If you did not hear the IP address press SHIFT and then INFO on the QRS remote control.
You may have to reboot PMII by unplugging from AC power and reconnecting.
Open Safari enter the IP address heard from the speaker.
QRSPNO Stand Alone
QRSPNO Stand Alone