User guide

Adjustment Procedures
41
Pedal Adjust
 Press“PedalAdjust”andthenslidethe“Start/StopTest”buontotherighttostarttheadjustment.
 TurnOFFthe“ThumpReducon”byslidingthebuontothele.
 ThesustainpedalsolenoidandthesustaindampersshouldstarttocycleONandOFF.
 This
procedureisnotnecessaryonsystemsthatdonothaveasustainpedalsolenoid,usuallyuprights.
 Pressthe“‐”buonstosetthe“InialDrive”and“Hold”valuestozero.
 WatchthesustaindampersandpresstheInialDrive’s“+” buonunl
thedampersmoveoffthestrings.
 Then,presstheHold“+”buonunlthedampersliupandholdoffofthestrings.

TurnONthe“ThumpReducon”byslidingthebuontotheright.Thumpreduconwillpulsethepedalsolenoidas
it’srelease
tobreakit’sfallandreducenoise.
 Adjustthereleaseupanddownunlthesolenoiddr opsquietly.
 Stoptheadjustmentbyslidingthe“Start/StopTest”buontothele. 
Pedal Test
 Press“TestFiles”
 Select“PedalKeySync.MIDtotestyourpedaladjustment.