Installation manual

QRS Music Technologies, Inc. / Technical Support - 800-247-6557 / www.qrsmusic.com
81525i
7
1.42_3 July 7, 2011
Key Adjust
Press “System Setup”
The key adjustment sets the minimum force for each key.
There is no “save” button. Your changes are automatically saved to memory.
Press “Key Adjust” and then the “START” button.
Piano key #5 should begin to repeat.
You must set the Legato AND Staccato Force level for each key.
Set the Legato adjustment first.
Previous Key / Key Number / Next Key
Key “Force”: Legato & Staccato. Adjust so key plays as softly as possible.
“Extend”: Sets the Force value displayed to all notes upscale.
Sets the Force value displayed to ALL notes upscale and down.
Chromatic Scale: Down/Up. Use as a final test.
You MUST press the EXIT button when finished.
Global
Press “Test Files” then “Test-Up_Down Runs” for a warm-up before adjusting key levels.