Installation manual

QRS Music Technologies, Inc. / Technical Support - 800-247-6557 / www.qrsmusic.com
81525i
3
1.42_3 July 7, 2011
3
Plug the wireless power adapter into an AC outlet. There are two possible locations:
or
The un-switched outlet [UNSW OUT] on the type A power supply, if it’s not being used.
The extension cord from the wall outlet that runs inside or under the piano.
Connect the Ethernet cable from the wireless to the Ethernet port on the PMII processor.
Using the Velcro strip supplied, attach the wireless unit to the piano .
Installation and Hook-Up the WiFi Adapter
WiFi Adapter
Connecting the Speaker to PMII
Connect your powered speaker to the PMII’s Audio #3 jack. Use the 1/8” stereo-to-RCA cable provided.
Amplified Speaker