Interactive Whiteboard Owner’s Manual V20100107 Qomo HiteVision, LLC www.QOMO.
Note: Attentions during installing and operating. Caution: Damages to people during operating or damages to machine caused by improper operation. To prevent fire or electric shock, please don’t expose the whiteboard in rain or wet environment. Interactive Whiteboard should avoid fire, electric shock and direct sunlight. Whiteboard’s net weight is 23~30kg. Please fix the whiteboard on the wall with screws to make it safe.
System Requirements ....................................................................................................................... 4 Instruction ......................................................................................................................................... 5 Software Features: ............................................................................................................................ 6 How to install hardware ................................................
System Requirements Lowest Environmental Requirements: · · · · · · CPU: 1.0GHz×86 Memory: 256M Display Card: Support 256 or above Hard Disk: 1G Screen Display Resolution: 800×600, 1024×768, 1280×1024 USB 1.1 port Recommended: · · · · · · CPU: 2.0GHz×86 Memory: 512M or above Display Card: Support 256 or above Hard Disk: 2G Screen Display Resolution: 1024×768 、1280×1024 USB2.
Instruction Interactive whiteboard uses scanning induction technology. Working together with projector and computer, Interactive whiteboard can be used as a big writing panel. To any image projected on the whiteboard, you can write on and touch the whiteboard directly with writing pen. Interactive Whiteboard provides more advanced system functions and more effective presentation than before. Main Features: Writing: Write, draw and perform mouse functions with your finger.
Software Features: Flow!Works(E) software has below features: Designed for teaching and conference systems. The screen display is high light and low glare. Saves images in Vector image format. Vector images take up less storage space and makes file transferring easier and faster. Users can customize pen type, line width, and color schemes to fit their individual preferences. Powerful screen functioning supports real-time editing.
How to install hardware Install whiteboard Before install whiteboard application software, please refer below instruction to install whiteboard first. There are three installation ways based on different whiteboard model: Install whiteboard on wall （1330.5） Step 1: Set desired height according to user’s preferences, place the stilettos on the wall to make holes for wall mounting parts and hook, then fix wall mounting parts and hook by screws.
1330.5mm. Step 2: Install whiteboard on the wall mounting parts and hook.
Install whiteboard on floor stands There are two stands: A (SD10)type and B type. Please check your stand type before install. A（SD10） Type： Adjustable bar Fixing Screw A Vertical bar Middle bar Fixing screwBB 固定螺丝 Movable hook Three hook position Fixing screw C Triangle stand Wheel Step 1: Open two vertical bars into triangle stand, fix their fixing screws C at two sides. Step 2: Fix two middle bars on two vertical bars with fixing screws A and Screw B.
Step 5: Pull out adjustable bar, put whiteboard on hool and then put down adjustable bar, shown as above. Step 6: Fastern the fixing screws on two vertical bars. B Type： Step 1: Each stand includes four parts: Wheels, middle bard, and vertical bar (including adjustable bar). Here are setup steps: 1). Fix four wheels on stand.2). Fix two vertical bars on the wheel bars with screws (screw A and screw B positions on below picture). 3). Fix the middle bar on two vertical bars with screws.
Step 2: Referring “Install whiteboard on Wall” to install main control box. Step 3: Put the whiteboard on stands, the adjustable bar is flexible, adjust height you desired and then fix with height adjustment screws.
—12—
Install whiteboard behind blackboard You can install whiteboard behind blackboard to work with blackboard. Here is installation step: 1. Take off a removable blackboard. 2. Make a rectangle hole under the removable blackboard taken off based on whiteboard connection box’s position, make sure the whiteboard cable can put through. 3. Take off connection box on whiteboard, put whiteboard on the frame, then put whiteboard cable pass through rectangle hole. 4.
—14—
Install whiteboard pen Pen tip (Left button) Right button Moving button Charger Socket How to use The Whiteboard pen can simulate three kinds of mouse modes as follows: 1. Mouse move: Put the pen tip close to the whiteboard and move. 2. Mouse left click: Press down the pen tip on the whiteboard and move. 3. Mouse right click: Put the pen tip close to the whiteboard and press down the button on the pen.
Install eraser Replace battery of eraser Open the battery cover on eraser, put in an AAA alkalescent battery according to the anode and cathode (the spring side is the cathode) to the battery hole, and then fasten the battery cover before use the eraser.
How to use Press active button once to make eraser inter work mode. The eraser can simulate as traditional eraser, place eraser on the electromagnetic whiteboard surface and wipe slightly to clear stroke on whiteboard. Tips: The eraser will enter stand by model to save power when it is not used. So please press active button before use. The eraser is mainly used to clear electronic pen stroke, in order to prolong its use life, please do not use it to clear stroke of water pen and chalk.
Whiteboard Connection There are two connection ways of whiteboard: USB connection, and RF wireless connection, please select your connection way based on whiteboard model you purchased. USB connection Step 1: Setup whiteboard. Step 2: Adjust the position of projector and whiteboard. Step 3: There is USB port on connection box at the lower right corner of whiteboard, plug one end of USB cable to this USB port. Step 4: Plug another end of USB cable to host computer’s USB port.
Step 4: Connect computer and projector (refer to projector’s user’s manual). Notes: Wireless receiver’s place position need ensure the distance between wireless receiver and whiteboard ≤15 meters and there is no barrier to block electromagnetic wave.
How to install and uninstall the software Install Software Once whiteboard is connected to computer, the system will prompt “Find new hardware”, shown as below: Click “Cancel”, please install software as below: Insert the installation CD into the computer’s ROM, double click CD, the below dialog window appears: —20—
Click , the below dialog window appears: Follow screen prompt to finish application software installation, then start to install driver.
Please save other files and click “Yes，I want to restart my computer now.” to restart computer, then the application software and driver have been installed successfully. How to uninstall the software If you want to remove the Whiteboard control software from your computer, please use “Add/Delete Program” in “Control Panel” to uninstall, select “Flow!Works(E)” and click “Remove/Delete” to uninstall the software.
Search and bind whiteboard Tips: No need to search and bind software if you use USB or USB-COM connection. If you use RF wireless connection, after finish software installation, you need search and bind software. Step 1: Connect all hardware and whiteboard server program, the following prompt appears at the lower right task bar.
Step 5: Check whiteboard’s IEEE address, the whiteboard main control box shows whiteboard’s IEEE address. Step 6: Click to open pop down list and then you can select the whiteboard that you want to bind. For example: If you want to bind whiteboard with IEEE address is 01 02 00 09 12 09 00 02, please select 01 02 00 09 12 09 00 02 item on list. If you can not find its IEEE address on list, please click “Re-search board” and search again.
After bind successfully, the server icon will turn to green: —25—
Calibration To make the whiteboard work normally, you must make sure the pen track in the projector accords with the actual pen track accurately. And calibration of pen function will get good writing accuracy.
Step 4: Click the center of the flashing “十” with pen to make four “十”s stop flashing. This is a successful calibration. And according to the operation to calibrate the other three “十” one by one to finish the Whiteboard calibration. Tips： Improper calibration will cause whiteboard can not work, please do calibration properly again. Click the key “ESC”, you will cancel the calibration operation.
*Two pen writing (optional) If your purchased electromagnetic whiteboard has two pens writing function, please pay attention to below instruction: When you use two pens writing, need select hard pen You can use two pens writing on the whiteboard at same time. The computer system can not support two-mouse operation, so when the whiteboard is not in writing mode, two pens can not operate at same time.
Problem Trouble Shooting ※Please refer to this list if your whiteboard use USB connection.
Wireless pen can write but very slow Spiking stroke Caused software The stroke is slow than pen tip There stroke write is spiking when you by anti-virus Close anti-virus software The computer is running too many software Close some software you do not use The computer setting is too low Please update hardware There is strong magnetic interference Remove the interference source or change a new environment without interference.
※Please refer to this list if your whiteboard use wireless connection.
Whiteboard is disconnecte d suddenly during use Can not write Wireless pen can write, but there is warp Wireless pen can write but very slow Spiking stroke Eraser can not work The server program changes to red during work When there is many whiteboard around yours, others bound your whiteboard wrongly Please bind your whiteboard again and remind others do not bind your whiteboard.
Questions and Answers What kinds of projector should I use? You can use any projector that can project the computer image on the Whiteboard, including LCD project with high resolution and LCD board projector in lower price. Make sure the projector supports the resolution of the computer and 650ANSL is enough. What should I do if I write on the Whiteboard by the water pen or permanent pen that can not be erased? The whiteboard has two kind of surface: erasable surface and non-erasable surface.
Specification Model QWB200EM QWB300EM QWB100WSEM Frame size 88” 96” 100” Technology Electromagnetic Electromagnetic Electromagnetic Writing method Wireless electromagnetic pen(two pen writing) Wireless electromagnetic pen(two pen writing) Wireless electromagnetic pen(two pen writing) Aspect Ratio 4:3 4:3 16:9 83″(1740*1200mm) 92″(1920*1320mm) 96″(2130*1200mm) Resolution 17400*12000 19200*13200 21300*12000 Hardware Resolution 100points/cm 254points/inch 100points/cm 254points/inc
Stand(optional)/Eraser /Pen holder Stand(optional)/Eraser /Pen holder Stand(optional)/Eraser /Pen holder Wireless connection box, wireless dongle, 5V power adapter, COM port connection box, 15M special USB-COM cable Wireless connection box, wireless dongle, 5V power adapter, COM port connection box, 15M special USB-COM cable Wireless connection box, wireless dongle, 5V power adapter, COM port connection box, 15M special USB-COM cable -20℃~ 50℃ -20℃~ 50℃ -20℃~ 50℃ 15%*90% 15%*90% 15%*90% Storage
If you want to learn more about our products, please visit our website: www.qomo.com If you need more assistance, please kindly send email to our technical support: support@qomo.
28265 Beck Road, Suite C-1 Wixom, MI, 48393, USA Phone: 1-866-990-QOMO (1-866-990-7666) Fax: (248)281-1999(US) or (248)281-1998(International) Sales Information and Quotes: info@qomo.com Literature Request: info@qomo.com Technical Assistance and Service:support@qomo.
