INTERACTIVE WHITEBOARD Owner’s Manual
Table of Contents What’s In The Box ............................................................................... 2 QOMO Whiteboard System Requirements........................................ 3 Introduction ......................................................................................... 4 Whiteboard Software Features........................................................... 5 How to Install Hardware......................................................................
What’s In The Box Thank you for your purchase of the QOMO Interactive Whiteboard. If any items are missing or damaged, please contact your authorized reseller immediately. CONTENTS: White Board * 1 pc USB Cable 49 ft (7.
QOMO Whiteboard System Requirements Lowest Environmental Requirements: · · · · · CPU: 300MHz×86 Memory: 128M Display Card: Support 256 or above Hard Disk: 100M Screen Display Resolution: 800×600、1024×768 、 1280×1024 · USB1.
Introduction QOMO’s Interactive Whiteboard uses infrared technology. Working seamlessly with a projector and computer, the QOMO Interactive Whiteboard provides more convenient, interactive and effective presentations. Perfect for school auditoriums, conference rooms, trade shows, symposiums and lecture halls. Users can write on the screen using the included pens, wand or the user’s finger. Writing: Write, draw and perform mouse functions with your finger.
Whiteboard Software Features: Designed for teaching and conference systems. High gain and low glare screen. Saves images in Vector image format. storage space and makes file transferring easier and faster Users can customize pen type, line width, and color schemes to fit their individual preferences. Powerful screen functions supports real-time editing Graphic tools allow users to choose a background, input graphics and Vector images take up less images.
How to Install Hardware 1. How to install QWB56/200/300/100WS hardware Install Pen Tray: In the frame of the board, prior to securing the pen tray you will find a slot that accommodates a Kensington lock. If you would like to use a Kensington lock insert and loop the cable through the center hole on the frame, position the pen tray in line with the four screws, and then screw the pen tray in place.
Install Wall-mounting: Set desired height according to user’s preferences. Using the wall-mounting brackets as a template, place the 8 stilettos on the wall and screw bolts into each hole. Align the wall-mounting brackets onto the bolts and tighten the bolts. Check that each location hole faces each corresponding bolt and hang the white board to the wall.
8
Install White Board on a Floor Stand: (1) Lock all four casters in the down position (as shown) (2) With an assistant’s help, hang Interactive whiteboard on the floor stand by lowering the two bolts onto the top hooks and securing the bottom bolts into the bottom hooks. There are two heights for hanging according to user’s preferences.
2.
Grey color frame with pen tray: In the frame of the board, prior to securing the pen tray you will find a slot that accommodates a Kensington lock. If you would like to use a Kensington lock insert and loop the cable through the center hole on the frame, position the pen tray in line with the four screws, and then screw the pen tray in place.
Install Wall-mounting: (1) Install two wall-mounting brackets A at the back of the interactive whiteboard (with the four screws at the top of the back of the interactive whiteboard), shown below: (2) Install two wall-mounting brackets C at the back of the whiteboard (with the two screws at the bottom of the back of the whiteboard), shown below: 12
Set desired height according to user’s preference. Place the 4 stilettos on the wall and screw bolts into each hole to fix the wall-mounting brackets B. Make sure the distance between the two wall-mounting brackets B is fit for hanging the interactive whiteboard. Shown below: After hanging the whiteboard, place 2 stilettos on the wall according to the actual position and screw bolts into each hole to fix the wall-mounting brackets C.
Install White Board on a Floor Stand: (1) Assemble the stand with screws, shown below: (2) Lock all four casters in the down position (as shown) （3）With an assistant’s help, hang Interactive whiteboard on the floor stand by lowering the two bolts onto the top hooks and securing the bottom bolts into the bottom hooks. There are five heights for hanging according to user’s preferences.
How to Install Software 1. Install Software Connect the Whiteboard to your computer or laptop using the provided USB cable and insert the QOMO Interactive Whiteboard CD. Once the USB cable is connected the computer will notify that it has “found new hardware” and the following window will appear: Pease click “Cancel” and use the following method to install the application software.
Click Whiteboard Software to begin installation Follow the prompts in the dialog box messages to complete the installation. Double-click on the Microsoft DirectX9.0 to install Direct X9.0 Follow the prompts to install DirectX9.0. Once the installation of the DirectX and Whiteboard Setup is complete, click ‘Yes” to restart your computer.
Once the software is installed an icon will appear in the computer’s windows system tray. indicates a connection has been made to the Whiteboard, indicates no connection has been made, please check the hardware connection and USB driver. Note: Under Windows XP, the USB driver may need to be reinstalled if the connection to another USB port. Please press “Next” to search USB driver automatically. Double-click on the icon to populate the options menu.
System setup is used to set the simulation of mouse’s right-click and double-click based on user’s preferences. To Simulate Right-click: The pen will function as a mouse right-click when the pen tip stops on the screen more than 1500 milliseconds (right-click time) and moves a distance less than 20 pixels (response time).
Users can calibrate image if the projected touch point is offset from actual contact location. To calibrate, click ‘Calibrate’ on the options menu then click ‘Start’ Using the Interactive Whiteboard white dots will appear on the screen, to orient the projected image on the board, follow the on screen instructions by clicking on the white dot each time it appears on the screen.
Writing pens and eraser There are three colored writing pens and one eraser, red, black, and blue. The writing pen can write with the same color or users can choose a different color from the color palette in the software. ★ Writing with single-finger, moving with multi-finger. How to Use Whiteboard Annotation Software Please refer to the on the CD for details.
Troubleshooting Guide Problem Reason Try the following Install/reinstall the driver by run The whiteboard driver is not icon appears installed in windows START menu on the task bar at the lower right of Connection Failure between the screen computer and the whiteboard Restart computer and reinstall Installation error software The stroke color is the same or The writing content similar to the background cannot be Hands and/or some objects on displayed on the screen screen Retry the connectio
Frequently Asked Questions Why isn’t anything showing up on the screen? 1：The selected stroke color may be the same as or similar to the background color. Please change the stroke color and try again. Otherwise, the pen may not be working properly. Please contact your reseller immediately. Do I have to run calibration after reinstalling the application software? 1：No. To keep it simple, the system records your last location adjustment parameters.
QOMO Interactive Whiteboard User Tips When searching for a specific page among many pages enter the Page Index mode and look up this page quickly on the Page Sorter window. 、 Press the Ctrl+ key combination ( accurately. 、 ) to move/place objects To improve the displaying speed, the size of the image in use should be no larger than the size of the screen resolution. If possible, convert the picture that will be inserted into WMF format first.
Specifications 56" Interactive Whiteboard QWB56 Technology Infrared Touch System Pen, Wand or Finger Touchable range 46" x 33" (1159mm x 831mm) Resolution 1024 x 1024 Response Time First dot:25ms,continuous dot:8ms Cursor Speed 120 inches/second Coordinate Accuracy 3mm Consumer Current Area Size (Diagonal) Active ≤75mA Port USB Dimensions 52" x 38" (1331mm x 971mm) Packing Dimensions 55" x 43" x 8" (1400 x 1100 x 200mm) Net Weight 31 lbs (14kg) Gross Weight 48 lbs (22kg) Software
78" Interactive Whiteboard QWB200 Technology Infrared Touch System Pen, Wand or Finger Touchable range 65" x 46" (1653mm x 1159mm) Resolution 1024 x 1024 Response Time First dot:25ms,continuous dot:8ms Cursor Speed 120 inches/second Coordinate Accuracy 3mm Consumer Current Area Size (Diagonal) Active ≤80mA Port USB Dimensions 72" x 51" (1824mm x 1301mm) Packing Dimensions 80" x 60" x 8" (2040 x 1520 x 200mm) Net Weight 57 lbs (26kg) Gross Weight 75 lbs (34kg) Software Drivers Win
88" Interactive Whiteboard QWB300 Technology Infrared Touch System Pen, Wand or Finger Touchable range 72" x 52" (1817mm x 1323mm) Resolution 2048 x 2048 Response Time First dot:25ms,continuous dot:8ms Cursor Speed 120 inches/second Coordinate Accuracy 3mm Consumer Current Area Size (Diagonal) Active ≤85mA Port USB Dimensions 78" x 58" (1988mm x 1465mm) Packing Dimensions 80" x 66" x 8" (2204 x 1684 x 200mm) Net Weight 66 lbs (30kg) Gross Weight 88 lbs (40kg) Software Drivers Win
105" Interactive Whiteboard QWB100WS Technology Infrared Touch System Pen, Wand or Finger Touchable range 84" x 46" (2145mm x 1159mm) Resolution 4096 x 4096 Response Time First dot:25ms,continuous dot:8ms Cursor Speed 120 inches/second Coordinate Accuracy 3mm Consumer Current Area Size (Diagonal) Active ≤100mA Port USB Dimensions 91" x 51" (2317mm x 1301mm) Packing Dimensions 99" x 59" x 7" (2522 x 1500 x 170mm) Net Weight 66 lbs (30kg) Gross Weight 88 lbs (40kg) Software Drivers
78" Interactive Whiteboard QWB200 SLIM Technology Infrared Touch System Pen, Wand or Finger Touchable range 65" x 46" (1653mm x 1159mm) Resolution 4096 x 4096 Response Time First dot:25ms,continuous dot:8ms Cursor Speed 120 inches/second Coordinate Accuracy 3mm Consumer Current Area Size (Diagonal) Active ≤80mA Port USB Dimensions 69" x 49" (1745mm x 1252mm) Packing Dimensions 74" x 53" x 5" (1869 x 1357 x 120mm) Net Weight 50 lbs (23kg) Gross Weight 59 lbs (27kg) Software Drivers
88" Interactive Whiteboard QWB300 SLIM Technology Infrared Touch System Pen, Wand or Finger Touchable range 71" x 51" (1796mm x 1303mm) Resolution 4096 x 4096 Response Time First dot:25ms,continuous dot:8ms Cursor Speed 120 inches/second Coordinate Accuracy 3mm Consumer Current Area Size (Diagonal) Active ≤85mA Port USB Dimensions 75" x 56" (1909mm x 1414mm) Packing Dimensions 80" x 60" x 5" (2033 x 1521 x 120mm) Net Weight 57 lbs (26kg) Gross Weight 68 lbs (31kg) Software Drivers
Technical Support How to Reach QOMO: By Phone Call us at 1-866-990-QOMO. Our expert support staff is available to provide technical assistance from 9:00AM through 5:00PM Eastern Standard Time, Monday through Friday. Please gather the following information before calling: - Product model name(s) and numbers - Product serial number(s) - Date of purchase - Detailed and specific questions Online Technical support is also available online at QOMO’s web site at www.qomo.com.
Copyrights © 2004 QOMO Hitevision, LLC. All Rights Reserved.
