User`s manual

SmartRG™ Residential Gateways
Page | 50 Confidential SmartRG © 2012
19. Create the IPTV traffic classifier by selecting Advanced Setup -> Quality of Service -> QoS
Classification and click Add.
Figure 42 QoS IPTV Classifier Configuration
20. Set the Name, Rule Order, and enable the classifier rule.
IMPORTANT
NOTE
If you create the classifier rules in priority order (VoIP then IPTV), you may leave the
“Rule Order” set to “Last.” Each successive classifier rule created will become the
last one checked in the traffic identification process.
21. Select an “Ether Type” of IP (0x800).
22. Enter the “Differentiated Service Code Point (DSCP) Check” value.
NOTE
AF21 (DSCP18) is common for Mediaroom STBs.