User`s manual

Configuring Your SmartRG™ - Common Use Cases
SmartRG © 2012 Confidential Page | 49
13. Create the VoIP traffic classifier by selecting Advanced Setup -> Quality of Service -> QoS
Classification and click Add.
Figure 41 QoS VoIP Classifier Configuration
14. Set the Name, Rule Order, and enable the classifier rule.
IMPORTANT
NOTE
If you create the classifier rules in priority order (VoIP then IPTV), you may leave the
“Rule Order” set to “Last.” Each successive classifier rule created will become the
last one checked in the traffic identification process.
15. Select an “Ether Type” of IP (0x800).
16. Enter the source MAC and Mask values in 01:02:03:04:05:06/FF:FF:FF:00:00:00 format.
17. Assign the Classification Queue (identified by WAN interface&Precedence&Path).
18. Click Apply/Save.