User`s manual

SmartRG™ Residential Gateways
Page | 32 Confidential SmartRG © 2012
6. If you would like to select a specific Wi-Fi channel (1-11), select Wireless -> Advanced and
change the Channel setting. The default value is “Auto.”
7. Select Wireless -> Security
Figure 22 Wireless - Security Settings
8. Select the “SSID” configured in step 3 above.
9. Select the “Network Authentication” – WPA2 with a Pre-Shared Key is common
10. Enter the “WPA Pre-Shared Key.” Click the link to display the private key value.
11. Click Apply/Save.