User`s manual

Multi-WAN VPN QoS Router
80
7.7 Port Group Management
Service ports can be grouping as IP grouping. It is convenient to set QoS, firewall access rules,
and other functions.
User edit port
Input the name, protocol, and port range for the specific service port.
Name
Name the Port in order to identify its property. For example, Virus 135.
Protocol
Choose the port protocol form the pull down list like TCP, UDP or TCP and
UDP.
Port Range
Input the port range. For example, 135 to 135.
Add to Port List
After setting name, protocol and port range, push this button to add the
information into the Port list below. This port can be from some port
groups.
Group Name
When you add new groups, please note if the group name is in the
column. For example, Virus.
Delete Group
Choose the group that you would like to delete from the pull- down list,
and push the ―Delete Group‖ button. System will ask you again if you
would like to delete the group. After pushing the confirmation button,
the group will be deleted.
button
You can choose several ports from Port list on the left side, and push this
button to have them added into the group the right side.