User`s manual

Multi-WAN VPN QoS Router

Load balancing function supports Auto Load Balance mode, Specify WAN Binding mode and

Strategy Routing mode to allow deployment of flexible network connection required to control

traffic flow to guarantee that whole connections are unobstructed. Strategy Routing mode is

simply to configure the network without the input of IP address. It can automatically detect

outbound packets and filter telecom connection to ensure quick response and packet pass

through without obstruction, and it can aggregate the same ISP bandwidth for load balancing

control and increase flexibility of network resource.

Built-in Firewall system can fulfill market requirement in defense of internet attacks for most

enterprise. Initiative packet inspection via the network layer dynamic detection denies or blocks

non-standard protocol connections. It can easily employ complete protection functions to ensure

network security, as required for any kind of hack attacks, worm & Virus and ARP attacks by

one-way control. Firewall system has not only NAT function but also DoS attack. Complete

Functions of Access Rules can allow managers to select the network service levels to deny or allow

accesses, and it can also limit or deny LAN users to use the network and to avoid the network

resource being occupied or threatened due to improper uses.

NAT function can provide the translation between private IP and public IP, which can allow

multi-user to connect the internet with one public IP at the same time. LAN IP supports four Class

C connections, and DHCP server is also supported, as well as an easy configuration of IP-MAC

binding function allowing network structure to be flexible and easy to deployed and managed.

In addition, the VPN Router also supports virtual routing function. One-WAN branch can be

upgraded to dual-WAN transmit ion easily, Enterprise with one-WAN can connect to dual-WAN

center by easy configuration and traffic will pass through other WAN lines from the center network.

This can also accelerate the connections among different areas to solve the connection bottleneck

problem.

Qno is a supporter of the IPSec Protocol. IPSec VPN provides DES, 3DES, AES-128 encryption,

MD5, SH1 certification, IKE Pre-Share Key, or manual password interchange. GIGABIT SSL/IPSec

VPN Router also supports aggressive mode. When a connection is lost, GIGABIT SSL/IPSec VPN

Router will automatically re-connect. In addition, the VPN Router features NetBIOS transparency,

and supports IP grouping for connections between clients and host in the virtual private network.

The VPN Router offers the function of a standard PPTP server, which is equipped with

connection setting status. Each WAN port can be set up with multiple DDNS at the same time. It

is also capable of establishing VPN connections with dynamic IP addresses.