User`s manual
Multi-WAN VPN QoS Router
61
addresses or to specific destination Service Ports and to specific destination IP addresses
through an assigned WAN to the Internet. After being assigned, the specific WAN will only
support those assigned Intranet IP addresses, destination Service Ports, or destination IP
addresses. Those which are not configured will go through other WANs for external
connection. Only when this mode is collocated with ―Assigned Routing‖ can it bring the
function into full play.
Example 1:How do I set up the Assigned Routing Mode to keep all Intranet IP addresses from
going through WAN2 when the destination is Port 80, and keep all other services from going
through WAN1?
As in the figure below, select ―HTTP[TCP/80~80]‖ from the pull-down option list
―Service‖, and then in the boxes of ―Source IP‖ input ―192.168.1.0 ~ 0‖ (which means to
include all Intranet IP addresses). Retain the original numbers ―0.0.0.0‖ in the boxes of
―Destination IP‖ (Which means to include all Internet IP addresses). Select WAN2 from the
pull-down option list ―Interface‖, and then click ―Enable‖. Finally, click ―Add New‖ and the
rule will be added to the mode. After the rule is set up, only packets that go to Port 80 will
be transmitted through WAN2, while other traffics will be transmitted through WAN1.