User`s manual

Multi-WAN VPN QoS Router
58
Auto Load Balancing mode when enabled:
The collocation of the Auto Load Balance Mode and the Auto Load Mode will enable more
flexible use of bandwidth. Users can assign specific Intranet IP addresses to specific
destination application service ports or assign specific destination IP addresses to a WAN
users choose for external connections.
Example 1:How do I set up Auto Load Balance Mode to assign the Intranet IP 192.168.1.100
to WAN2 for the Internet?
As in the figure below, select ―All Traffic‖ from the pull-down option list ―Service‖, and
then in the boxes of ―Source IP‖ input the source IP address ―192.168.1.100‖ to ―100‖.
Retain the original numbers ―0.0.0.0‖ in the boxes of ―Destination IP‖ (which means to
include all Internet IP addresses). Select WAN2 from the pull-down option list ―Interface‖,
and then click ―Enable‖. Finally, click ―Add New‖ and the rule will be added to the mode.