User`s manual

Multi-WAN VPN QoS Router
53
feedback stably and speedily. (Please input the DNS IP of the ISP
port).
DNS Lookup
Host:
This is the detect location for DNS. (Only a web address such as
www.hinet.net is acceptable here. Do not input an IP address.)
In addition, do not input the same web address in this box for
two different WANs.
Note！
In the load balance mode for Assigned Routing, the first WAN port (WAN1) will be saved
for the traffic of the IP addresses or the application service ports that are not assigned to
other WANs (WAN2, WAN3, and WAN4). Therefore, in this mode, we recommend assigning
one of the connections to the first WAN. When other WANs (WAN2, WAN3, or WAN4) are
broken and connection error remove (Remove the Connection) has been selected for the
connection detection system, traffic will be shifted to the first WAN (WAN1). In addition, if
the first WAN (WAN1) is broken, the traffic will be shifted to other WANs in turn. For
example, the traffic will be shifted to WAN2 first; if WAN2 is broken too, the traffic will be
shifted to WAN3, and so on.
6.2.3 Protocol Binding
WAN Setting:
Protocol Binding
Users can define specific IP addresses or specific application service ports to go through a
user-assigned WAN for external connections. For any other unassigned IP addresses and services,