User`s manual

Multi-WAN VPN QoS Router
42
6.2 Multi- WAN Setting
6.2.1 Load Balance Mode
Auto Load Balance Mode
When Auto Load Balance mode is selected, the device will use sessions or IP and the WAN
bandwidth automatically allocate connections to achieve load balancing for external connections.
The network bandwidth is set by what users input for it. For example, if the upload bandwidth of
both WANs is 512Kbit/sec, the automatic load ratio will be 1:1; if one of the upload bandwidths is
1024Kbit/sec while the other is 512Kbit/sec, the automatic load ratio will be 2:1. Therefore, to
ensure that the device can balance the actual network load, please input real upload and
download bandwidths.
 Session Balance: If ―By Session‖ is selected, the WAN bandwidth will
automatically allocate connections based on session number to achieve network
load balance.
 IP Session Balance: If ―By IP‖ is selected, the WAN bandwidth will automatically
allocate connections based on IP amount to achieve network load balance.
Note!
For either session balancing or IP connection balancing, collocation with Protocol
Binding will provide a more flexible application for bandwidth. Users can assign a
specific Intranet IP to go through a specific service provider for connection, or assign an
IP for a specific destination to go through the WAN users assign to connect with the
Internet.
For example, if users want to assign IP 192.168.1.100 to go through WAN 1 when