User`s manual

Multi-WAN VPN QoS Router
40
WAN IP address
Enter the public IP address.
Subnet mask
Enter the public IP address subnet mask.
WAN default gateway
Enter the WAN default gateway, which provided by your ISP.
DNS Servers
Enter the DNS server IP address, you must have to enter a
DNS server IP address, maximum two DNS servers IP
addresses available..
Intranet routing
default gateway
Enter one of IP addresses that provide by the ISP as your
default gateway.
Intranet IP addresses
range
Enter your IP addresses range, which IP addresses are
provided by ISP. If you have multiple IP ranges, you need
setup group1 and group 2.
You can also setup the default gateway and IP range in the
group 2.
same ISP.
Click “Apply” to save the configuration, or click “Cancel" to leave without making any
changes.
DMZ Setting
For some network environments, an independent Configurable DMZ port may be required to
set up externally connected servers such as WEB and Mail servers. Therefore, the device supports
a set of independent Configurable DMZ ports for users to set up connections for servers with real
IP addresses. The DMZ ports act as bridges between the Internet and LANs.
IP address: Indicates the current default static IP address.
Config.: Indicates an advanced configuration modification: Click Edit to enter the advanced
configuration page.
The DMZ configuration can be classified by Subnet and Range: