User`s manual

Multi-WAN VPN QoS Router
39
WAN IP address
Enter the public IP address.
Subnet mask
Enter the public IP address subnet mask.
WAN default gateway
Enter the WAN default gateway, which provided by your ISP.
DNS Servers
Enter the DNS server IP address, you must have to enter a
DNS server IP address, maximum two DNS servers IP
addresses available..
Intranet routing
default gateway
Enter one of IP addresses that provide by the ISP as your
default gateway.
Intranet IP addresses
range
Enter your IP addresses range, which IP addresses are
provided by ISP. If you have multiple IP ranges, you need
setup group1 and group 2.
You can also setup the default gateway and IP range in the
group 2.
Enable Line-Dropped
Scheduling
The WAN disconnection schedule will be activated by
checking this option. In some areas, there is a time
limitation for WAN connection service. For example: the
optical fiber service will be disconnected from 0:00 am to
6:00 am. Although there is a standby system in the device,
at the moment of WAN disconnection, all the external
connections that go through this WAN will be disconnected
too. Only after the disconnected lines are reconnected can
they go through the standby system to connect with the
Internet. Therefore, to avoid a huge number of
disconnection, users can activate this function to arrange
new connections to be made through another WAN to the
Internet. In this way, the effect of any disconnection can be
minimized.
Line-Dropped Period
Input the time rule for disconnection of this WAN service.
Line-Dropped
Scheduling
Input how long the WAN service may be disconnected before
the newly added connections should go through another
WAN to connect with the Internet.
Backup Interface
Select another WAN port as link backup when port binding is
configured. Users should select the port that employs the