User`s manual

Multi-WAN VPN QoS Router

Line-Dropped Period

Input the time rule for disconnection of this WAN service.

Line-Dropped Scheduling

Input how long the WAN service may be disconnected before

the newly added connections should go through another WAN

to connect with the Internet.

Link Backup Interface

Select another WAN port as link backup when port binding is

configured. Users should select the port that employs the same

ISP.

Shared- Circuit WAN

environment

If your WAN connects to a Switch, select ―Enabled‖ to filter

broadcast packets. The default is ―Disabled‖.

MTU:

MTU is abbreviation of Maximum Transmission Unit. ―Auto‖ and

―Manual‖ can be chosen. The default value is 1500. Different

value could be set in different network environment. (e.g. ADSL

PPPoE MTU: 1492)

The default is ―Auto‖.

After the changes are completed, click “Apply” to save the configuration, or click “Cancel"

to leave without making any changes.

Static IP

If an ISP issues a static IP (such as one IP or eight IP addresses, etc.), please select this

connection mode and follow the steps below to input the IP numbers issued by an ISP into the

relevant boxes.