User`s manual

Multi-WAN VPN QoS Router
27
Use the following DNS
Server Addresses:
Select a user-defined DNS server IP address.
DNS Server:
Input the DNS IP address set by ISP. At least one IP group
should be input. The maximum acceptable groups is two IP
groups.
Enable Line-Dropped
Scheduling:
The WAN disconnection schedule will be activated by checking
this option. In some areas, there is a time limitation for WAN
connection service. For example: the optical fiber service will be
disconnected from 0:00 am to 6:00 am. Although there is a
standby system in the device, at the moment of WAN
disconnection, all the external connections that go through this
WAN will be disconnected too. Only after the disconnected lines
are reconnected can they go through the standby system to
connect with the Internet. Therefore, to avoid a huge number of
disconnection, users can activate this function to arrange new
connections to be made through another WAN to the Internet.
In this way, the effect of any disconnection can be minimized.