User`s manual

Multi-WAN VPN QoS Router

LAN Setting

This is configuration information for the device current LAN IP address. The default

configuration is 192.168.1.1 and the default Subnet Mask is 255.255.255.0. It can be changed

according to the actual network structure.

Multiple-Subnet Setting:

Click ―Add/Edit‖ to enter the configuration page, as shown in the following figure. Input the

respective IP addresses and subnet masks.

This function enables users to input IP segments that differ from the router network segment

to the multi-net segment configuration; the Internet will then be directly accessible. In other

words, if there are already different IP segment groups in the Intranet, the Internet is still

accessible without making any changes to internal PCs. Users can make changes according to

their actual network structure.

Dynamic IP

There are four set of Class C DHCP server. The defaults are enable. LAN PCs can get IP

automatically without configured and recorded.

IP Range Start:

The four default IP segments initial from 192.168.1.100,

192.168.2.100, 192.168.3.100, 192.168.4.100. Users can

configure according actual demand.