User`s manual
Multi-WAN VPN QoS Router
202
Operation-Master Mode
Besides operating network with another device, Master device
is also the DHCP server to issue LAN IP addresses. Although
Slave device also supports outbound linking, its DHCP server is
disabled.
WAN Backup
(The Checked WANs are not
working in this device.)
The checked WANs will works in the other device. For an
example, if WAN1 and WAN2 work in this device, and WAN3
and WAN4 work in the other device, WAN3 and WAN4 should
be checked.
LAN Gateway Backup
Input LAN IP of Slave device. The IP should be different from
LAN IP of Master device.
MAC Address of the backup
device
Input LAN MAC of Slave device. It should be different from LAN
MAC of Master device.
Status
―Status-Normal‖ means both two devices operate normally.
―Status-Backup‖ indicates Slave mode has problems, and the
device enables backup to take over WAN