User`s manual

Multi-WAN VPN QoS Router
186
DNS Server
Input registered NS Record, ex. ns1, ns2.
Interface:
Assign WAN IP address as corresponding IP of NS Record. The system will
show all acquired enabled WAN IP addresses automatically so that users can
check directly. But users have to check if the IP addresses are the same as
the corresponding settings on TWNIC DNS service provider. (Ex.
ns1.abc.com.tw  WAN1: 210.10.1.1, ns2.abc.com.twWAN2: 200.1.1.1)
7. Host Record: Add or modify host record. (A Record)