User`s manual

Multi-WAN VPN QoS Router
182
11.7 Inbound Load Balance
Qno Firewall/Router not only supports efficient Outbound Load Balance, but Inbound Load
Balance. It distributes inbound traffic equally to every WAN port to make best use of bandwidth.
It also can prevent traffic from unequally distribution and congested. Users can use only one
device to satisfy the demand of Inbound/Outbound Load Balance simultaneously.
Following introduces how to enable and setup Inbound Load Balance step by step.
Attention!
In For some models of Qno routers, user can try the function for a period but with time
limit. If the function can match your network demand, you can apply for the official version
License Key in Qno Official Website (www.qno.com.tw). After applying, auditing, paying
and inputting License Key successfully, users can use the official version without time limit.
1. System Tool => License Key => Try to enable ―Inbound Load Balance.‖
After enabling Trial version, ―Status and Information‖ column will display the remaining trial
time. If trial expires, the function can not work out at all unless users enter an official License Key.
2. Go to ―Inbound Load Balance‖ in ―Advanced Function‖ and click ―Edit‖ to configure.
3. Enable ―Inbound Load Balance.‖