User`s manual

Multi-WAN VPN QoS Router
172
―Show Routing Table‖ (as in the figure) to display the current routing list.
Dest. IP:
Subnet Mask:
Input the remote network IP locations and subnet that is to
be routed. For example, the IP/subnet is
192.168.2.0/255.255.255.0.
Gateway:
The default gateway location of the network node which is to
be routed.
Hop Count:
This is the router layer count for the IP. If there are two
routers under the device, users should input ―2‖ for the
router layer; the default is ―1‖. (Max. is 15.)
Interface:
This is to select ―WAN port‖ or ―LAN port‖ for network
connection location.
Add to List:
Add the routing rule into the list.
Delete Selected Item:
Remove the selected routing rule from the list.
Show Table:
Show current routing table.