User`s manual

Multi-WAN VPN QoS Router
153
setting options facilitate classified management for QnoKey users and enhance security.
Enable this rule:
Select this option to activate this setting rule.
Group Account ID:
Enter the QnoKey group name that users would like to
set up.
Interface:
Select WAN port and enter the correct IP address
which corresponds to WAN port or the domain name
(analyzed by DDNS).If WAN ports are empty, IP entry
is not necessary so that VPN connection will not fail.
This option allows users to select which WAN port to
make connection, facilitating management. If WAN1 is
selected, QnoKey group users can connect through
only WAN1. If both WAN 1and WAN 2 are selected,
QnoKey group users are allowed to make connection
via WAN 1or WAN 2. When WAN1 is disconnected,
WAN2 will be automatically connected to back up VPN
connection.
Note:
 If WAN port is selected and the network connection
type is set as static IP, the system will
automatically display this WAN IP. Administrator
does not need to enter it manually.
 If WAN port is selected and the network connection
is set to other types such as DHCP/PPPoE,
administrator needs to enter the IP address or
domain name (through DDNS analysis).
Life Time:
Set the valid time for QnoKey group. If the QnoKey is
for normal and frequent use, the option "Forever"
may be selected so the user end valid time is infinite. If
the user is more complicated or if it is meant for mobile
users who travel on business, the VPN security can be
guaranteed by setting the valid time of QnoKey as